D6N Track-Type Tractor Caterpillar

This diagnostic code is recorded when the Machine ECM determines that the blade angle right solenoid requires calibration. This diagnostic code will only appear when the Machine ECM has been replaced or new software has been flashed into the Machine ECM.

Test Step 1. CALIBRATE THE SOLENOID

1. Perform the calibration procedure for the solenoid. See the Testing and Adjusting, KENR8558, "Implement Solenoid Valve - Calibration" procedure.

Expected Result:

The calibration procedure for the solenoid was performed successfully.

Results:

• YES - The calibration procedure for the solenoid was performed successfully. Resume normal machine operationSTOP

• NO - The calibration procedure for the solenoid was not performed successfully.

  Repair: Repeat the calibration procedure for the solenoid. See the Testing and Adjusting, KENR8558, "Implement Solenoid Valve - Calibration" procedure.

  STOP