1986/04/21 Caterpillar


Use Care When Removing Oil Pan And 9N3167 Plate{1302}

Usage:


3406B Truck Engines

The 3406B Truck Engines with air-to-air aftercooling (ATAAC) have a 9N3167 Plate between the oil pan and the bottom of the cylinder block. The 9N3167 Plate is also used on some OEM (Original Equipment Manufacturers) truck models that have a setback front axle. This plate is fastened to the bottom of the cylinder block with three S1588 Bolts (3/8" - 16 course thread, 1 1/4" long). The oil pan can be removed without removing the plate. The illustration shows the location of the oil pan and the 9N3167 Plate.

------ WARNING! ------

Use care and a suitable support when removing the 9N3167 Plate from the bottom of the cylinder block. The 9N3167 Plate weighs approximately 31 kg (68 lb). The plate could cause personel injury if it falls.

-------WARNING!-------


Location of the oil pan and the 9N3167 Plate.

Caterpillar Information System:

1986/04/21 New Conversion Groups Available To Convert From Hydramechanical Governors To Woodward PSG Governors{1289}
1986/04/21 New Wire Assemblies And Spark Plug Insulators Improve Service Life Of Ignition System{1558,1555,1552,1408}
1986/04/21 Fittings Added To Jacket Water Heater Hose To Prevent Interference With Folded Core Radiator{1353,1383}
1986/04/21 Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21 Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21 New Tool Available To Measure Propeller Pitch{0600,3305}
1986/04/21 Silicone Rubber Hoses Available For Engine Oil Cooler Water Lines{1378,1380}
1986/04/21 New Alternators Are Self-Energizing And Have Built-In Regulators{1405}
1986/04/07 Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07 New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07 Fuel Injection Timing Changed To 15° With New 3.5° Timing Advance{1206,1272,1292}
1986/04/07 New Bracket Used In Air Compressor Lines Group{1803,1804,1800}
1986/05/05 New Publication Lists Service Manual Modules for Caterpillar Earthmoving And Engine Service Manuals{0374,0375}
1986/05/05 Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05 Portable Hydraulic Pump Group Available{0600}
1986/05/05 FT Tooling Prints Available For Bushing Installation In Governor Housing{0600,1287}
1986/05/05 Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05 Special Editions of Service Magazine And How To Find Them{0374}
1986/05/12 Top Shaft Wear Sleeve For 7241 Marine Transmissions Can Be Used On 7231 Marine Transmissions{3306}
1986/05/12 Cylinder Liner Seat Insert Available{1217,1200}
1986/05/12 New Service Meter Kits Used For Service Replacement{7480}
1986/05/12 Identification Of Crankshafts For Marine Society Approval{1202}
1986/05/12 Bolt And Washer Added To Engine Air Lines Group To Help Retain Pipes{1058,1060,1050}
1986/05/12 6V7921 Seal Kit Available For 8T3115 Portable Field Track Lubricator{0615,0645,4170}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.