Torque Converter
Show/hide table
Illustration 1 | g02789371 |
(1) Torque for the 16 bolts ... 60 ± 7 N·m (44 ± 5 lb ft)
(2) Lubricate the bore lightly. Use the lubricant to be sealed.
(3) Torque for plug ... 285 ± 25 N·m (210 ± 18 lb ft)
(4) Torque for bolt ... 285 ± 25 N·m (210 ± 18 lb ft)
(5) Torque for the 18 bolts ... 60 ± 7 N·m (44 ± 5 lb ft)
(6) 325-9335 Separator Plate
- Quantity ... 2
- Thickness ... 1.52 ± 0.08 mm (0.0598 ± 0.0031 inch)
(7) 258-5652 Friction Disc
- Quantity ... 2
- Thickness ... 3.05 ± 0.1 mm (0.1201 ± 0.0039 inch)
(8) Torque for the eight bolts ... 60 ± 7 N·m (44 ± 5 lb ft)
(9) 8P-7858 Freewheel Spring
- Length under test force ... 5.6 mm (0.2205 inch)
- Test force ... 9 ± 2 N (2.0 ± 0.5 lb)
- Free length after test ... 9.1 mm (0.3583 inch)
- Width ... 49 ± 0.5 mm (2 ± 0.02 inch)
- Test force ... 9 ± 2 N (2.0 ± 0.5 lb)
Note: Springs to be assembled with the maximum number of loops towards outside diameter of cam.
Caterpillar Information System:
C7 PETROLEUM Petroleum Engine Fan Drive - Disassemble
CX28 On-Highway Transmission Transmission Planetary
AccuGrade® GPS (CD700) Brightness (Display and Light Bar)
CX28 On-Highway Transmission Power Train Hydraulic System
C7 PETROLEUM Petroleum Engine Fan Drive - Remove
CX28 On-Highway Transmission Torque Converter
C7 PETROLEUM Petroleum Engine Inlet Air Temperature Sensor - Remove and Install
C7 On-Highway Engine Cylinder Head - Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Shutdown (MMS) - MMS System Shutdown
CX28 On-Highway Transmission Visual Inspection
CX28 On-Highway Transmission General Troubleshooting Information
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Shutdown (SMS) - Single Module System
C4.4 Industrial Engine Fuel Injection Lines
C4.4 Industrial Engine Fuel Transfer Pump
C4.4 Industrial Engine Fuel Filter Base
C4.4 Industrial Engine Fuel Injection Pump
3456 Generator Sets Reference Material
C4.4 Industrial Engine Fuel Priming Pump
C7 PETROLEUM Petroleum Engine Fan Drive - Assemble
C15 On-Highway Engine Housing (Front) - Remove
C15 On-Highway Engine Housing (Front) - Install
C15 On-Highway Engine Gear Group (Front) - Remove
C15 On-Highway Engine Gear Group (Front) - Install
C7 and C9 On-Highway Engines Vehicle Speed Parameters