Fan Drive - Disassemble
拆解步骤
开始:
- 拆下风扇驱动装置。 请参阅拆解和组装, "风扇驱动装置 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将螺栓 (10) 、垫圈 (11) 和板 (9) 从支架组件 (1) 上拆下。
Show/hide table
 | |
| 图 1 | g01263120 |
- 将支架组件 (1) 从轮毂 (6) 上拆下。
- 将轴承内圈 (8) 和隔套 (7) 从轮毂 (6) 上拆下。
- 将密封 (3) 、隔套 (4) 和轴承内圈 (5) 从轮毂 (6) 上拆下。 将轴承外圈 (12) 从轮毂 (1) 上拆下。 将定位销 (2) 从支架组件 (1) 上拆下。
Caterpillar Information System:
CX28 On-Highway Transmission Transmission Planetary
AccuGrade® GPS (CD700) Brightness (Display and Light Bar)
CX28 On-Highway Transmission Power Train Hydraulic System
C7 PETROLEUM Petroleum Engine Fan Drive - Remove
CX28 On-Highway Transmission Torque Converter
C7 PETROLEUM Petroleum Engine Inlet Air Temperature Sensor - Remove and Install
C7 On-Highway Engine Cylinder Head - Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Shutdown (MMS) - MMS System Shutdown
CX28 On-Highway Transmission Visual Inspection
CX28 On-Highway Transmission General Troubleshooting Information
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Shutdown (SMS) - Single Module System
C15 On-Highway Engine Electronic Unit Injector Sleeve - Install
CX28 On-Highway Transmission Torque Converter
C4.4 Industrial Engine Fuel Injection Lines
C4.4 Industrial Engine Fuel Transfer Pump
C4.4 Industrial Engine Fuel Filter Base
C4.4 Industrial Engine Fuel Injection Pump
3456 Generator Sets Reference Material
C4.4 Industrial Engine Fuel Priming Pump
C7 PETROLEUM Petroleum Engine Fan Drive - Assemble
C15 On-Highway Engine Housing (Front) - Remove
C15 On-Highway Engine Housing (Front) - Install
C15 On-Highway Engine Gear Group (Front) - Remove
C15 On-Highway Engine Gear Group (Front) - Install