Flywheel Housing
Show/hide table
| |
| Illustration 1 | g01754835 |
Note: Before you install the flywheel housing, inspect the front face of the flywheel housing and the rear face of the cylinder block. The front face of the flywheel housing and the rear face of the cylinder block must be free of the following substances: oil, fuel, water, gasket adhesive, assembly compounds and any other foreign materials.
To seal the joint between the flywheel housing and the cylinder block, apply 8T-9022 Silicone Gasket to the mating surface of the flywheel housing.
Caterpillar Information System:
904H Compact Wheel Loader Machine Systems Pilot Valve (Electrohydraulic Control) - Install
Procedure to Improve the Downshift on Series H Compact Wheel Loaders{3159, 4350, 4355, 7610, 7620} Procedure to Improve the Downshift on Series H Compact Wheel Loaders{3159, 4350, 4355, 7610, 7620}
904H Compact Wheel Loader Machine Systems Pilot Valve (Electrohydraulic Control) - Remove
XQ400 Power Module System Pressure Release
D9T Track-Type Tractor Power Train Brake - Assemble
D9T Track-Type Tractor Power Train Brake - Disassemble
328-3305 Machine Ar (Underground Mine){7000} 328-3305 Machine Ar (Underground Mine){7000}
904H Compact Wheel Loader Power Train Service and Parking Brake (Standard Axle) - Remove
904H Compact Wheel Loader Machine Systems Lift Arms - Install
904H Compact Wheel Loader Machine Systems Lift Arms - Remove
613G Wheel Tractor-Scraper Engine Supplement Radiator Module - Remove
613G Wheel Tractor-Scraper Engine Supplement Radiator Module - Install
D5R Track-Type Tractor Power Train Decelerator Pedal and Brake Pedal
2008/12/15 Correction to Troubleshooting Guides {3141, 3175}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Steering Column Spline (Command Control Steering) - Lubricate
D5R Track-Type Tractor MID 039 - CID 0299 - FMI 08
D5R Track-Type Tractor MID 039 - CID 0299 - FMI 13
3408E and 3412E Engines for Caterpillar Built Machines Injector Solenoid - Test
D5R Track-Type Tractor MID 039 - CID 0358 - FMI 03
2008/12/08 The Freespool Mechanism for the Hydraulic Winch Has Been Improved {5165}
2008/12/01 Setting Modifications for the Messenger Display that Is Used With On-Highway Truck Engines in South America and Venezuela {1901, 1920, 7490}
Procedure for After a Water Pump Replacement, Coolant Fill, and Start-up{1000, 1361, 1395} Procedure for After a Water Pump Replacement, Coolant Fill, and Start-up{1000, 1361, 1395}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Mirror - If Equipped
904H Compact Wheel Loader Power Train Oscillating Axle (Rear), Transfer Drive, Final Drive Planetaries and Differential - Remove