C7 PETROLEUM Petroleum Engine Caterpillar


Turbocharger Outlet Pressure Sensor - Remove and Install

Usage:

C7 C7P

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。



注意

在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。

按照本地法规和条例处置所有液体。





图 1g01260320

  1. 从涡轮增压器出口压力传感器 (2) 上断开线束组件 (1) 。

  1. 拆下涡轮增压器出口压力传感器 (2) 和 O 形密封圈。

安装步骤




    图 2g01260320

    注: 检查 O 形密封圈有无磨损或损坏。 如有必要,更换O型密封圈。

  1. 将 O 形密封圈安装到涡轮增压器出口压力传感器 (2) 上。

  1. 安装涡轮增压器出口压力传感器 (2) 。 将涡轮增压器出口压力传感器 (2) 上紧到 10 ± 2 N·m (88 ± 18 lb in) 的扭矩。

  1. 将线束组件 (1) 连接到涡轮增压器出口压力传感器 (2) 上。

Caterpillar Information System:

C4.4 Industrial Engine Crankcase Breather (Canister) - Replace
C7 PETROLEUM Petroleum Engine Speed/Timing Sensor - Remove and Install
AccuGrade® GPS (CD700) Beeper
C7 PETROLEUM Petroleum Engine Injection Actuation Pressure Sensor - Remove and Install
2006/08/01 A New Piston Cooling Jet Assembly Has Been Released {1331}
AccuGrade® GPS (CD700) Avoidance Zone
2006/08/14 A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/04/10 Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
C7 PETROLEUM Petroleum Engine Engine Oil Pressure Sensor - Remove and Install
CX31-P600 Petroleum Transmission Transmission Planetary
C7 On-Highway Engine Cylinder Head - Remove
C7 PETROLEUM Petroleum Engine Coolant Temperature Sensor - Remove and Install
C15 On-Highway Engine Electronic Unit Injector Sleeve - Remove
C15 On-Highway Engine Electronic Unit Injector Sleeve - Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Shutdown (SMS) - Single Module System
CX28 On-Highway Transmission General Troubleshooting Information
CX28 On-Highway Transmission Visual Inspection
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Shutdown (MMS) - MMS System Shutdown
C7 On-Highway Engine Cylinder Head - Install
C7 PETROLEUM Petroleum Engine Inlet Air Temperature Sensor - Remove and Install
CX28 On-Highway Transmission Torque Converter
C7 PETROLEUM Petroleum Engine Fan Drive - Remove
CX28 On-Highway Transmission Power Train Hydraulic System
AccuGrade® GPS (CD700) Brightness (Display and Light Bar)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.