Engine Oil Filter Base
Show/hide table
图 1 | g01268423 |
(1) 242-3864 弹簧
- 数量 ... 2
- 在试验力下的长度 ... 43.18 mm (1.700 in)
- 试验力 ... 43.7 N (9.8 lb)
- 试验后的自由长度 ... 58.50 ± 0.50 mm (2.303 ± 0.020 in)
- 外径 ... 11.0 mm (0.43 in)
- 在试验力下的长度 ... 43.18 mm (1.700 in)
(2) 机油滤清器旁路阀必须在以下压力下打开。 ... 125 ± 30 kPa (18.1 ± 4.4 psi)
Show/hide table
图 2 | g01268425 |
(3) 将双头螺栓装入发动机机油滤清器底座前,在双头螺栓的底座端涂抹 9S-3263 螺纹固定剂 。 长度 ... 10.0 ± 1.5 mm (0.39 ± 0.06 in)
(3) 螺柱的扭矩 ... 68 ± 7 N·m (50 ± 5 lb ft)
(4) 用清洁未使用的发动机机油润滑机油滤清器密封。 拧紧滤清器,直到密封件与底座接触。 用手将滤清器额外拧紧 3/4 圈(270 度)。
Show/hide table
图 3 | g01268417 |
按数字顺序将发动机机油滤清器底座拧紧至标准扭矩。
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Camshaft
963D Track-Type Loader Power Train Piston Motor (Hydrostatic)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Foot Switch (Differential Lock)
613G Wheel Tractor-Scraper Power Train Differential Lock
613G Wheel Tractor-Scraper Power Train Drive Shaft
613G Wheel Tractor-Scraper Power Train Axle Mounting
C9.3 Engine for Caterpillar Built Machines Fuel Injector
Custom Product Support Literature for the 980H Wheel Loaders that have a 331-9944 Steel Mill Arrangement {0374, 7000} Custom Product Support Literature for the 980H Wheel Loaders that have a 331-9944 Steel Mill Arrangement {0374, 7000}
D6R Track-Type Tractor Fuel Tank Cap Filter and Strainer - Replace/Clean
993K Wheel Loader Machine Systems Selector and Pressure Control Valve (Secondary Steering) - Disassemble
Medium Wheel Loader Series H Definitions of Configuration Parameters for Transmission, Engine and Implement Electronic Control Modules{1901, 1920, 4800, 7610, 7620} Medium Wheel Loader Series H Definitions of Configuration Parameters for Transmission, Engine and Implement Electronic Control Modules{1901, 1920, 4800, 7610, 7620}
988F and 988F Series II Wheel Loaders Power Train Oscillating Axle (Rear) - Install
993K Wheel Loader Machine Systems Selector and Pressure Control Valve (Secondary Steering) - Assemble
374F Excavator Seat
Custom Product Support Literature for the 980H Wheel Loaders that have a 331-9943 Steel Mill Arrangement {7000} Custom Product Support Literature for the 980H Wheel Loaders that have a 331-9943 Steel Mill Arrangement {7000}
D6R Track-Type Tractor Pivot Shaft Oil Level - Check
613G Wheel Tractor-Scraper Fuel Tank Cap and Strainer - Clean
2008/09/01 Improved Orientation of the Hose on the Hydraulic Oil Lines Group {5057}
613G Wheel Tractor-Scraper Sound Information and Vibration Information
C9.3 Engine for Caterpillar Built Machines Exhaust Manifold
613G Wheel Tractor-Scraper Machine Monitor System Data Link
953D Track-Type Loader Power Train Brake and Final Drive Group
2008/09/29 New Belts and Belt Tensioners are Used {1207, 1359}
2008/09/08 An Improved Seal For The Exhaust Tube Is Now Used {1062}