Illustration 1 | g01541354 |
Side view |
Displacement per revolution
- Minimum ... 60 ± 1.0 cc (3.7 ± 0.06 cu in)
- Maximum ... 200 ± 0.5 cc (12.2 ± 0.03 cu in)
Rotation ... Bidirectional
(A) Use the following shims in order to maintain a distance of 0.25 to 0.40 mm (0.009 to 0.012 inch) at various displacement angles:
-
145-8452 Shim
- Quantity ... 1
- Thickness of the shim ... 5.50 mm (0.217 inch)
-
145-8453 Shim
- Quantity ... 1
- Thickness of the shim ... 5.60 mm (0.221 inch)
-
145-8454 Shim
- Quantity ... 1
- Thickness of the shim ... 5.70 mm (0.224 inch)
-
145-8455 Shim
- Quantity ... 1
- Thickness of the shim ... 5.80 mm (0.228 inch)
-
145-8456 Shim
- Quantity ... 1
- Thickness of the shim ... 5.90 mm (0.232 inch)
-
145-8457 Shim
- Quantity ... 1
- Thickness of the shim ... 6.00 mm (0.236 inch)
(1) Torque for two O-ring plugs ... 127 N·m (95 lb ft)
(2) Torque for two locknuts ... 69 N·m (50 lb ft)
(3) Torque for the O-ring plug ... 147 N·m (110 lb ft)
Note: Apply 4C-4030 Thread Lock Compound or 185-3996 Thread Lock Compound to the threads of the screws.
(4) Torque for seven screws ... 21 ± 6 N·m (15 ± 4 lb ft)
Illustration 2 | g01636955 |
View B-B |
(5) Torque for eight bolts ... 240 ± 40 N·m (177.01440 ± 30 lb ft)
(6) Torque for four bolts ... 25 N·m (18 lb ft)
(7) Torque for plug ... 35 ± 3.5 N·m (26 ± 3 lb ft)
(8) Torque for two plugs ... 40 N·m (30 lb ft)
(9) Torque for four bolts ... 75 N·m (55 lb ft)
Illustration 3 | g01636829 |
Motor rotating group |
(10) Torque for the shaft bearing in the fixture ... 31.51 ± 1.0 N·m (23.2 ± 0.7 lb ft)
Measure bearing preload without the pistons and the center pin. Bearings must be coated in the lubricant that was applied by the manufacturer.
(B) Use the following shims in order to maintain a thickness of 53.000 + 0 - 0.050 mm (2.087 + 0 - 0.002 inch):
-
145-8429 Shim
- Quantity ... 1
- Thickness of the shim ... 4.80 mm (0.189 inch)
-
145-8430 Shim
- Quantity ... 1
- Thickness of the shim ... 4.85 mm (0.191 inch)
-
145-8431 Shim
- Quantity ... 1
- Thickness of the shim ... 4.90 mm (0.193 inch)
-
145-8432 Shim
- Quantity ... 1
- Thickness of the shim ... 4.95 mm (0.195 inch)
-
145-8433 Shim
- Quantity ... 1
- Thickness of the shim ... 5.00 mm (0.197 inch)
(C) Use the following spacers in order to obtain the maximum clearance between the snap ring and the spacer of 0.050 mm (0.002 inch):
-
145-8443 Spacer
- Quantity ... 1
- Thickness of the spacer ... 3.50 mm (0.138 inch)
-
145-8442 Spacer
- Quantity ... 1
- Thickness of the spacer ... 3.45 mm (0.136 inch)
-
145-8441 Spacer
- Quantity ... 1
- Thickness of the spacer ... 3.40 mm (0.134 inch)
-
145-8440 Spacer
- Quantity ... 1
- Thickness of the spacer ... 3.35 mm (0.132 inch)
-
145-8439 Spacer
- Quantity ... 1
- Thickness of the spacer ... 3.30 mm (0.130 inch)
-
145-8436 Spacer
- Quantity ... 1
- Thickness of the spacer ... 3.25 mm (0.128 inch)
-
145-8435 Spacer
- Quantity ... 1
- Thickness of the spacer ... 3.20 mm (0.126 inch)
-
145-8434 Spacer
- Quantity ... 1
- Thickness of the spacer ... 3.15 mm (0.124 inch)