2008/05/26 Caterpillar


New Hose Clamps are Now Used {1071}

Usage:

657B 47M
Wheel Tractor-Scraper:
657G (S/N: W1E1-UP; W1F1-UP)

Description of Change: The Wheel Tractor-Scrapers that are listed above have a new clamp for use on the scraper engine's air line group. This update will increase reliability of the machines by eliminating breakage of the clamps. If the clamps fail the air lines will leak.

Adaptable To: The new 212-6932 Clamp is a direct replacement for the 208-7448 Clamp. The new clamps are adaptable to the following machines:

  • 657G (S/N: W1E1-306; W1F1-153)

Table 1 shows the serial prefixes that mate together. Table 1 shows when the new clamps have been installed on production machines.

Table 1
Model     Tractor     Scraper    
657G     (S/N: W1C269-UP)     (S/N: W1E307-UP)    
(S/N: W1F154-UP)
(S/N: W1B128-UP) (S/N: W1F154-UP)    



Illustration 1g01540414

Typical Example

(1) Location for the clamps

Replace four of the 16 old 208-7448 Clamps with four new 212-6932 Clamps. The four clamps are shown at location (1). The clamp screws must face the opposite direction of each other.

Caterpillar Information System:

AccuGrade For Wheel Tractor-Scrapers Machine Radio
AccuGrade For Wheel Tractor-Scrapers Modes of Operation
AccuGrade For Wheel Tractor-Scrapers Machine Type - Configure
AccuGrade For Wheel Tractor-Scrapers Module - Flash Program
AccuGrade For Wheel Tractor-Scrapers Machine Position
AccuGrade For Wheel Tractor-Scrapers Machine Dimensions - Configure
AccuGrade For Wheel Tractor-Scrapers Operational Problems
AccuGrade For Wheel Tractor-Scrapers Operator Access
AccuGrade For Wheel Tractor-Scrapers Plan View Rotation
AccuGrade For Wheel Tractor-Scrapers Radio Utility
AccuGrade For Wheel Tractor-Scrapers Receiver
AccuGrade For Wheel Tractor-Scrapers Receiver Configuration
2008/06/02 New Machine And Implement Software Is Now Available {7620}
C9.3 Engine for Caterpillar Built Machines Fuel Injection Pump
D6K Track-Type Tractor Electrohydraulic Power Train Pivot Bar
2008/06/30 A New Kit for the Fuel Transfer Pump is Now Used {1256, 1714}
Installation of Pivot Kit For Steering Columns{4310, 4338} Installation of Pivot Kit For Steering Columns{4310, 4338}
Supplemental Parts and Service Information for the UAE 972H{7000} Supplemental Parts and Service Information for the UAE 972H{7000}
963D Track-Type Loader with Shiphold Arrangement Maintenance Interval Schedule
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2961 - FMI 03
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2961 - FMI 04
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Power Train Recoil Spring - Disassemble
613G Wheel Tractor-Scraper Hydraulic System Gear Pump (Brake)
2008/09/29 A New Hose Is Now Used on The Transmission Cooler Line on Some Medium Wheel Loaders {1375, 3016}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.