Relief Valve (Torque Converter Outlet) - Install
- Install O-ring seals (4) onto relief valve (2).
Show/hide table
Illustration 2 g01483953 - Install relief valve (2) and bolts (1). Tighten bolts (1) to a torque of
54 ± 7 N·m (40 ± 5 lb ft) . Connect harness assembly (3). - Fill the pump drive with the correct amount of oil. Refer to Operation and Maintenance Manual, "Transmission Oil - Change".
Show/hide table
| |
| Illustration 1 | g01483955 |
End By:
- Raise the guard for the transmission. Refer to Disassembly and Assembly , "Power Train Guard (Transmission) - Remove".
Caterpillar Information System:
973D Track-Type Loader Machine Systems Fuel Tank - Install
973D Track-Type Loader Machine Systems Fuel Tank - Remove
993K Wheel Loader Power Train Relief Valve (Torque Converter Outlet) - Remove
D6N Track-Type Tractor Fuel System Primary Filter/Water Separator - Drain
D6N Track-Type Tractor Fuel System Primary Filter (Water Separator) - Replace
854K Wheel Dozer Hydraulic System Torque Converter Stall and Implement Pump Double Stall - Test
854K Wheel Dozer Machine Systems Push Arms and Blade - Install
D6N Track-Type Tractor Fuel System Third Filter - Replace
C4.4 and C6.6 Engines for Caterpillar Built Machines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
993K Wheel Loader Power Train Transmission Oil Pump - Install
Proper Assembly Sequences for Installing Air Inlet Heater Relay (12VDC Relay: 175-2301 Magnetic Switch, 24VDC Relay: 148-0757 Magnetic Switch){1090, 1408} Proper Assembly Sequences for Installing Air Inlet Heater Relay (12VDC Relay: 175-2301 Magnetic Switch, 24VDC Relay: 148-0757 Magnetic Switch){1090, 1408}
854K Wheel Dozer Hydraulic System Location of Electrical Components
D6N Track-Type Tractor Fuel System Secondary Filter - Replace
D5R Track-Type Tractor Ripper Tips
854K Wheel Dozer Hydraulic System Piston Pump Cutoff Pressure (Hydraulic Fan) - Test and Adjust
854K Wheel Dozer Hydraulic System Piston Pump Margin Pressure (Hydraulic Fan) - Test and Adjust
Procedure to Install 315-6307, 315-6310 Coupler Lines Groups on Certain Wheel Loaders{5057, 5147, 5734, 6129, 7332} Procedure to Install 315-6307, 315-6310 Coupler Lines Groups on Certain Wheel Loaders{5057, 5147, 5734, 6129, 7332}
3500 Petroleum Engines and Petroleum Generator Sets Configuration Parameters
993K Wheel Loader Power Train Modulating Valve (Torque Converter Lockup Clutch) - Remove
854K Wheel Dozer Machine Systems Lift Cylinder Mounting - Remove and Install
993K Wheel Loader Power Train Modulating Valve (Torque Converter Lockup Clutch) - Install
993K Wheel Loader Power Train Modulating Valve (Torque Converter Impeller Clutch) - Remove
C4.4 Engines For Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
993K Wheel Loader Power Train Modulating Valve (Torque Converter Impeller Clutch) - Install