854K Wheel Dozer and 992K Wheel Loader Caterpillar


Battery - Remove and Install

Usage:

854K 221

拆卸步骤




    图 1g01439085

  1. 打开门组件 (1) 。

  1. 将蓄电池断路开关转到断开位置。



    图 2g01439087

  1. 断开正极电缆组件前,先断开负极电缆组件 (3) 。 拆下机架组件 (2) 。



    图 3g01439088

  1. 将合适的起吊设备连接到蓄电池 (4) 。 蓄电池 (4) 的重量为 53 kg (117 lb)。 拆下 (4) 。

  1. 对剩余的蓄电池重复该步骤。

安装步骤




    图 4g01439088

  1. 将合适的起吊设备连接到蓄电池 (4) 。 蓄电池 (4) 的重量为 53 kg (117 lb)。 安装蓄电池 (4) 。



    图 5g01439087

  1. 安装机架组件 (2) 。 连接电缆组件。 连接负极电缆组件 (3) 之前,务必先连接正极组件。



    图 6g01439085

  1. 将蓄电池断路开关转到接通位置。

  1. 关闭门组件 (1) 。

Caterpillar Information System:

992K Wheel Loader and 854K Wheel Dozer Power Train Transmission to Input Transfer Gears and Output Transfer Gears - Connect
854K Wheel Dozer and 992K Wheel Loader Oil Cooler Core (Engine) - Install
854K Wheel Dozer and 992K Wheel Loader Oil Cooler Core (Engine) - Remove
854K Wheel Dozer and 992K Wheel Loader Oil Cooler Core (Transmission) - Install
992K Wheel Loader and 854K Wheel Dozer Power Train Transmission from Input Transfer Gears and Output Transfer Gears - Separate
992K Wheel Loader and 854K Wheel Dozer Braking System Brake Accumulator
992K Wheel Loader Electrohydraulic System Main Hydraulic System
993K Wheel Loader Braking System Pressure Sensor (Axle Brake Oil)
992K Wheel Loader Electrohydraulic System Relief Valve (Implement Pilot)
992K Wheel Loader Electrohydraulic System Tilt Cylinder
992K Wheel Loader and 854K Wheel Dozer Power Train Final Drive, Brake and Wheel
Bench Test Procedure for a 990, 990 Series II, 990H Wheel Loader and a 844, 844H Wheel Dozer Torque Converter{3101} Bench Test Procedure for a 990, 990 Series II, 990H Wheel Loader and a 844, 844H Wheel Dozer Torque Converter{3101}
993K Wheel Loader Power Train Input Transfer Gears
994F Wheel Loader Power Train Differential and Bevel Gear (Rear) - Install
994F Wheel Loader Power Train Differential and Bevel Gear (Front) - Install
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway Connector Locations
992K Wheel Loader and 854K Wheel Dozer Power Train Output Transfer Gears - Disassemble
992K Wheel Loader and 854K Wheel Dozer Braking System Piston Pump (Brake)
993K Wheel Loader Power Train Transmission Hydraulic Control Operation
992K Wheel Loader and 854K Wheel Dozer Braking System Service Brakes
992K Wheel Loader and 854K Wheel Dozer Braking System Parking Brake
992K Wheel Loader and 854K Wheel Dozer Power Train Control Manifold (Axle Oil Cooler)
992K Wheel Loader and 854K Wheel Dozer Power Train Axle Oil Cooler Pump and Motor
992K Wheel Loader Electrohydraulic System Position Sensor (Lift Linkage) - Calibrate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.