992K Wheel Loader Electrohydraulic System Caterpillar


Solenoid Valve (Ride Control) (Tilt Dual Relief)

Usage:

992K H4C



Illustration 1g01434842

(1) Torque for the locknut ... 9.0 ± 0.5 N·m (80 ± 4 lb in)

(2) Final installation torque for the solenoid valve group ... 108 ± 7 N·m (80 ± 5 lb ft)

Note: The lead wire orientation should not be less than angle (A). The lead wire should form a loop below both the connector and the coil assembly in order to reduce the moisture entry.

(A) Angle below horizontal ... 15 degrees

Operating voltage ... 24 VDC

Resistance at 25 ± 5 °C (77 ± 9 °F) ... 32.6 ± 1.6 Ohms

Caterpillar Information System:

992K Wheel Loader and 854K Wheel Dozer Power Train Output Transfer Gears
992K Wheel Loader and 854K Wheel Dozer Steering System Gear Pump (Steering Oil Cooler) (Steering Pilot)
854K Wheel Dozer and 992K Wheel Loader Power Train Torque Converter Troubleshooting
Accugrade® Grade Control System - CD700 Text View
992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter Priority Valve - Assemble
993K Wheel Loader Electrohydraulic System Implement Cycle Time - Check
992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter Priority Valve - Disassemble
992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter Priority Valve - Install
953D, 963D and 973D Track-Type Loaders MID 039 - CID 0490 - FMI 04
953D, 963D and 973D Track-Type Loaders MID 039 - CID 0490 - FMI 03
992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter Priority Valve - Remove
C27 and C32 Engines for Caterpillar Built Machines Cooling System - Test
992K Wheel Loader and 854K Wheel Dozer Power Train Transmission Oil Pump - Remove
953D, 963D and 973D Track-Type Loaders MID 039 - CID 2242 - FMI 03
953D, 963D and 973D Track-Type Loaders MID 039 - CID 2242 - FMI 06
994F Wheel Loader Machine Systems Selector and Pressure Control Valve (Dead Engine Lower) - Install
953D, 963D and 973D Track-Type Loaders MID 039 - CID 2242 - FMI 13
992K Wheel Loader and 854K Wheel Dozer Power Train Transmission Oil Pump - Install
C4.4 Engines For Caterpillar Built Machines CID 0168 FMI 01
C4.4 Engines For Caterpillar Built Machines CID 0172 FMI 03
C4.4 Engines For Caterpillar Built Machines CID 0172 FMI 04
C13, C15, and C18 Tier 4 Final Engines Air Lines
C4.4 Engines For Caterpillar Built Machines Digital Throttle Position Sensor Circuit - Test
992K Wheel Loader and 854K Wheel Dozer Power Train Transmission Oil Pump - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.