Rear Access Egress System Oil Level - Check - If Equipped
The oil tank for the Rear Access Egress System (RAES) is located on the left side of the machine.
- Maintain the hydraulic oil level above the sight glass.
Show/hide table
Illustration 2 g01433485 - If necessary, add oil to the oil tank. Open the access door on the left side of the machine.
Show/hide table
Illustration 3 g01433545 - Press the button on the top of the breaker relief valve (2) in order to relieve any tank pressure. Remove the filler cap (1) and add oil.
- Install the filler cap and close the access door.
Show/hide table
| |
| Illustration 1 | g01433598 |
Caterpillar Information System:
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking System - Test
993K Wheel Loader Rear Access Egress System Oil - Change - If Equipped
993K Wheel Loader Rear Access Egress System Oil Filter - Replace - If Equipped
993K Wheel Loader Rear Access Egress System Bearings - Lubricate - If Equipped
2007/12/03 New Hardware for Bolted Joint on the Lower Elevator {6241}
993K Wheel Loader Rear Access Egress System Alarm - Test - If Equipped
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pan
992K Wheel Loader and 854K Wheel Dozer Power Train Temperature Sensor (Transmission Sump Oil)
992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter and Pump Drive Housing
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 1227 - FMI 04
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 1227 - FMI 03
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 0585 - FMI 02
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Electrical Input Components
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Electrical Output Components
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Location of Electrical Components
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Electrical Schematic
993K Wheel Loader Rear Access Egress System Oil Sample - Obtain - If Equipped
IT38H Integrated Toolcarrier and 938H Wheel Loader Fuel System - Prime
992K Wheel Loader and 854K Wheel Dozer Power Train Relief Valve (Torque Converter Outlet) - Remove
992K Wheel Loader and 854K Wheel Dozer Power Train Relief Valve (Torque Converter Outlet) - Disassemble
992K Wheel Loader and 854K Wheel Dozer Power Train Relief Valve (Torque Converter Outlet) - Assemble
992K Wheel Loader and 854K Wheel Dozer Power Train Relief Valve (Torque Converter Outlet) - Install
994F Wheel Loader Machine Systems Selector Valve (Hydraulic) - Remove
994F Wheel Loader Machine Systems Selector Valve (Hydraulic) - Install