1. Home
  2. Caterpillar
  3. Operation and Maintenance Manual
  4. #i02879987

993K Wheel Loader Caterpillar


Rear Access Egress System Oil Filter - Replace - If Equipped

Usage:

993K Z9K
Show/hide table
Illustration 1g01433485

  • The oil filter for the Rear Access Egress System (RAES) is located inside the access door on the left side of the machine. Open the access door.
    Show/hide table
    Illustration 2g01433487

  • Press the button on the breaker relief valve (1) in order to relieve any tank pressure.

  • Remove the oil filter (2) and dispose of the filter properly. Make sure that the old filter seal is removed from the filter base.

  • Apply a thin coat of oil to the seal on the new filter.

  • Install a new oil filter hand tight until the seal of the filter contacts the base. Note the position of the index marks on the filter in relation to a fixed point on the filter base.

    Note: There are rotation index marks on the oil filter that are spaced 90 degrees or 1/4 of a turn away from each other. When you tighten the filter, use the rotation index marks as a guide.

  • Tighten the filter according to the instructions that are printed on the filter. Use the index marks as a guide. For non-Caterpillar filters, use the instructions that are provided with the filter.

    Note: You may need to use a Caterpillar strap wrench, or another suitable tool, in order to turn the filter to the amount that is required for final installation. Make sure that the installation tool does not damage the filter.

  • Close the access door.

    • Caterpillar Information System:

    993K Wheel Loader Rear Access Egress System Bearings - Lubricate - If Equipped
    2007/12/03 New Hardware for Bolted Joint on the Lower Elevator {6241}
    993K Wheel Loader Rear Access Egress System Alarm - Test - If Equipped
    C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pan
    992K Wheel Loader and 854K Wheel Dozer Power Train Temperature Sensor (Transmission Sump Oil)
    992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter and Pump Drive Housing
    AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 1227 - FMI 04
    AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 1227 - FMI 03
    AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 0585 - FMI 02
    854K Wheel Dozer and 992K Wheel Loader Radiator Guard - Remove
    854K Wheel Dozer Machine Security System
    C32 Engine for D11T Track-Type Tractors Inlet Air Is Restricted
    993K Wheel Loader Rear Access Egress System Oil - Change - If Equipped
    IT38H Integrated Toolcarrier and 938H Wheel Loader Braking System - Test
    993K Wheel Loader Rear Access Egress System Oil Level - Check - If Equipped
    938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Electrical Input Components
    938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Electrical Output Components
    938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Location of Electrical Components
    938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Electrical Schematic
    993K Wheel Loader Rear Access Egress System Oil Sample - Obtain - If Equipped
    IT38H Integrated Toolcarrier and 938H Wheel Loader Fuel System - Prime
    992K Wheel Loader and 854K Wheel Dozer Power Train Relief Valve (Torque Converter Outlet) - Remove
    992K Wheel Loader and 854K Wheel Dozer Power Train Relief Valve (Torque Converter Outlet) - Disassemble
    992K Wheel Loader and 854K Wheel Dozer Power Train Relief Valve (Torque Converter Outlet) - Assemble
    Back to top
    Contacts My AVS
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.