D7E Track-Type Tractor Systems Caterpillar


Tip Cylinder (Ripper)

Usage:

D7E HKA


Illustration 1g03739721

Table 1
Specification for 265-5084 Ripper Cylinder Gp 
Item  Qty  Part  Specification Description 
9T-0610 Bearing  Bore before assembly is 76.525 ± 0.020 mm (3.0128 ± 0.0008 inch)
3J-9545 Locknut   Before assembly, lubricate the threads.
Torque to 6500 ± 380 N·m (4794 ± 280 lb ft)
265-5088 Rod As  Diameter is 69.950 ± 0.038 mm (2.7539 ± 0.0015 inch)
265-5086 Hydraulic Cylinder  Bore is 140.00 ± 0.08 mm (5.512 ± 0.003 inch)
264-0614 Head  Bore of the head over four lands (C) is 70.33 ± 0.03 mm (2.769 ± 0.001 inch).
Before assembly, lubricate the threads with clean grease.
Torque to 600 ± 130 N·m (443 ± 96 lb ft)
3G-5999 Bushing  Bore before assembly is 76.525 ± 0.020 mm (3.0128 ± 0.0008 inch).
Installation depth is 11.0 ± 0.5 mm (0.43 ± 0.02 inch)
167-2235 Buffer Seal As  Lubricate sealing lip lightly with the lubricant that is being sealed. 
167-2299 U-Cup Seal  Lubricate sealing lip lightly with the lubricant that is being sealed. 
278-2324 Wiper Seal  Lubricate sealing lip lightly with the lubricant that is being sealed. 
Before assembly, apply green Loctite 648 to the wiper seal groove. 

Caterpillar Information System:

613G Wheel Tractor-Scraper Cooling System Coolant (ELC) - Change
C6.6 Engines For Caterpillar Built Machines Intermittent Low Power or Power Cutout
C6.6 Engines For Caterpillar Built Machines Intermittent Engine Shutdown
C6.6 Engines For Caterpillar Built Machines Excessive White Smoke
C6.6 Engines For Caterpillar Built Machines Excessive Engine Oil Consumption
C6.6 Engines For Caterpillar Built Machines Excessive Black Smoke
C6.6 Engines For Caterpillar Built Machines Engine Stalls at Low RPM
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 0144 - FMI 06
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 0144 - FMI 05
AD55B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 0144 - FMI 03
2007/07/30 Correction to Systems Operation Testing and Adjusting , "Torque Converter Lockup Clutch Supply Pressure - Test and Adjust" {5073}
2007/07/30 An Improved Pressure Reducing Valve Is Available {5051, 5467}
613G Wheel Tractor-Scraper Draft Arm Wear Plates - Check/Adjust
2007/08/20 Plug Torque on the Main Control Valve Has Increased {5051}
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Secondary Steering Pump and Electric Motor - Remove
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Secondary Steering Pump and Electric Motor - Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems Bucket - Install
613G Wheel Tractor-Scraper Accumulator (Brake) - Check
D7E Track-Type Tractor Systems Flywheel Clutch
D11T Track-Type Tractor Power Train Drive Shaft
D11T Track-Type Tractor Power Train Bevel and Transfer Gears
D11R Track-Type Tractor Power Train Transmission
D11R Track-Type Tractor Power Train Filters (Torque Converter and Transmission)
D11T Track-Type Tractor Power Train Priority Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.