Emergency Stopping
Show/hide table
注意 |
---|
紧急停机控制装置只用于紧急情况。 切勿把紧急停机装置或控制装置用于正常的停机过程。 |
发动机停机后要确保辅助发动机运行的外部系统的所有部件都是安全可靠的。
紧急停机按钮
使用紧急停机按钮会停止燃油喷射。 如果配备,空气切断阀也启动。 关于如何使用紧急停机按钮,请参见原设备制造厂家 (OEM) 提供的说明。
Show/hide table
注意 |
---|
在找到迫使发动机紧急停机的问题并予以纠正以前,不要起动发动机。 |
重新起动发动机前可能有必要使紧急停机按钮复位。 如果配备,重新起动发动机前可能有必要使空气切断阀复位。
重新起动发动机前必须断开并重新接通 ECM 的电源。
Caterpillar Information System:
770 and 772 Off-Highway Truck Power Train Temperature Sensor (Transmission Oil)
C175 Generator Sets Cold Weather Starting
C4.4 Marine Generator Set Walk-Around Inspection
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
EMCP3 Engine Speed Timing Calibration - Setup
2006/03/27 Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
3508C, 3512C and 3516C Marine Engines Crankshaft - Install
C15 On-Highway Engine Variable Valve Actuator
C15 and C18 Generator Set Engines Engine Support (Front) - Remove and Install
C7 Marine Engines Fuel Pressure Sensor - Remove and Install
C7 Marine Engines Engine Oil Pressure Sensor - Remove and Install
C15 and C18 Generator Set Engines Pump Drive - Assemble
C175 Generator Sets Starting the Engine
C15 and C18 Generator Set Engines Engine - Remove
C18 Industrial Engines Model View Illustrations
C11 and C13 Industrial Engines Model View Illustrations
3512 Industrial Engine Engine Coolant Temperature Sensor
C11, C13 and C15 On-highway Engines 0212-03 5 Volt Sensor Supply #1 voltage high
C11, C13 and C15 On-highway Engines 0212-04 5 Volt Sensor Supply #1 voltage low
C9 On-Highway Engines Electronic Control System Components
G3500 A3 Engines Electronic Control System Operation
C9.3 Engine for Caterpillar Built Machines Cylinder Head
C15 and C18 Generator Set Engines Engine - Install
3500 Engines Turbocharger - Remove