Engine Coolant Temperature Sensor
Show/hide table
Illustration 1 | g01244174 |
(1) Torque ... 20 ± 3 N·m (15 ± 2 lb ft)
(2) The plug has socket A, socket B, and socket C.
Caterpillar Information System:
C11 and C13 Industrial Engines Model View Illustrations
C18 Industrial Engines Model View Illustrations
C15 and C18 Generator Set Engines Engine - Remove
C175 Generator Sets Starting the Engine
C175 Generator Sets Emergency Stopping
770 and 772 Off-Highway Truck Power Train Temperature Sensor (Transmission Oil)
C175 Generator Sets Cold Weather Starting
C4.4 Marine Generator Set Walk-Around Inspection
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
EMCP3 Engine Speed Timing Calibration - Setup
2006/03/27 Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
3508C, 3512C and 3516C Marine Engines Crankshaft - Install
C11, C13 and C15 On-highway Engines 0212-03 5 Volt Sensor Supply #1 voltage high
C11, C13 and C15 On-highway Engines 0212-04 5 Volt Sensor Supply #1 voltage low
C9 On-Highway Engines Electronic Control System Components
G3500 A3 Engines Electronic Control System Operation
C9.3 Engine for Caterpillar Built Machines Cylinder Head
C15 and C18 Generator Set Engines Engine - Install
3500 Engines Turbocharger - Remove
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Operational Checks
C7 Engines for Caterpillar Built Machines Vibration Damper
C9 Marine Engines and C9 Marine Generator Sets Turbocharger
3512 Industrial Engine Crankshaft
3512 Industrial Engine Camshaft