Fuel Pressure Sensor - Remove and Install
Removal Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect harness assembly (2) .
Show/hide table
Illustration 1 | g01243640 |
- Remove fuel pressure sensor (1) .
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 4C-4030     | Thread Lock Compound     | 1     |
- Apply Tooling (A) to the threads of fuel pressure sensor (1) .
Show/hide table
Illustration 2 | g01243640 |
- Install fuel pressure sensor (1) .
- Tighten fuel pressure sensor (1) to a torque of 10 ± 2 N·m (89 ± 18 lb in).
- Connect harness assembly (2) .
Caterpillar Information System:
C7 Marine Engines Engine Oil Pressure Sensor - Remove and Install
C15 and C18 Generator Set Engines Pump Drive - Assemble
C15 and C18 Generator Set Engines Pump Drive - Disassemble
3508C, 3512C and 3516C Marine Engines Crankshaft - Remove
C9 Marine Engines and C9 Marine Generator Sets Cylinder Head Valves
C175 Generator Sets Before Starting Engine
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Product Installation
Cleaning Fluid-Carrying Hose and Tube Assemblies In Shop and Field Applications {0645, 5050} Cleaning Fluid-Carrying Hose and Tube Assemblies In Shop and Field Applications {0645, 5050}
C7 Marine Engines Speed/Timing Sensor - Remove and Install
3512C and 3516C Engines Customer Parameters Worksheet
3512C and 3516C Engines System Configuration Parameters
C7 Marine Engines Injection Actuation Pressure Sensor - Remove and Install
C15 and C18 Generator Set Engines Engine Support (Front) - Remove and Install
C15 On-Highway Engine Variable Valve Actuator
3508C, 3512C and 3516C Marine Engines Crankshaft - Install
2006/03/27 Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
EMCP3 Engine Speed Timing Calibration - Setup
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
C4.4 Marine Generator Set Walk-Around Inspection
C175 Generator Sets Cold Weather Starting
770 and 772 Off-Highway Truck Power Train Temperature Sensor (Transmission Oil)
C175 Generator Sets Emergency Stopping
C175 Generator Sets Starting the Engine
C15 and C18 Generator Set Engines Engine - Remove