Before Starting Engine
Show/hide table
 |
|
发动机排气含有对人体有害的燃烧产物。 必须在良好通风的场所起动和运转发动机，如果在封闭场所，要将废气排到外面去。 |
为了获得您的发动机的最长使用寿命，在发动机起动之前，作一次彻底的检查。 在发动机起动之前，执行要求的日常保养和其它的定期保养内容。 进行本操作和保养手册, "绕行检查"专题中描述的绕行检查。 查找项目如：机油或冷却液渗漏、螺栓松动和废物堆积等。 清除所有废物。 如有必要，安排维修。
Show/hide table
| 注意 |
|---|
|
擦拭掉任何种类的渗漏液体(冷却液、润滑油或燃油)。 如果观察到渗漏情况，要找出泄漏的原因并解决。 如果怀疑有渗漏，应比推荐次数更为频繁地检查液位，直到找到或修好渗漏，或直到不再怀疑有渗漏。 |
Caterpillar Information System:
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Product Installation
Cleaning Fluid-Carrying Hose and Tube Assemblies In Shop and Field Applications {0645, 5050} Cleaning Fluid-Carrying Hose and Tube Assemblies In Shop and Field Applications {0645, 5050}
C7 Marine Engines Speed/Timing Sensor - Remove and Install
3512C and 3516C Engines Customer Parameters Worksheet
3512C and 3516C Engines System Configuration Parameters
C7 Marine Engines Injection Actuation Pressure Sensor - Remove and Install
C7 Marine Engines Fuel Temperature Sensor - Remove and Install
C7 Marine Engines Boost Pressure Sensor - Remove and Install
C7 Marine Engines Coolant Temperature Sensor - Remove and Install
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Speed Sensor (Transmission)
3508C, 3512C and 3516C Marine Engines Camshaft - Install
2006/04/03 Improved Bracket for the Aftercooler Water Lines {1063}
C9 Marine Engines and C9 Marine Generator Sets Cylinder Head Valves
3508C, 3512C and 3516C Marine Engines Crankshaft - Remove
C15 and C18 Generator Set Engines Pump Drive - Disassemble
C15 and C18 Generator Set Engines Pump Drive - Assemble
C7 Marine Engines Engine Oil Pressure Sensor - Remove and Install
C7 Marine Engines Fuel Pressure Sensor - Remove and Install
C15 and C18 Generator Set Engines Engine Support (Front) - Remove and Install
C15 On-Highway Engine Variable Valve Actuator
3508C, 3512C and 3516C Marine Engines Crankshaft - Install
2006/03/27 Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
EMCP3 Engine Speed Timing Calibration - Setup
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing