Engine Support (Front) - Remove and Install
拆卸步骤
开始:
- 拆下散热器风扇。 请参阅拆解和组装, "风扇 - 拆卸和安装"。
- 拆下减振器和皮带轮。 请参阅拆解和组装, "减振器和皮带轮 - 拆卸和安装"。
- 用适当的起吊设备支撑发动机前部。
Show/hide table
图 1 | g01243866 |
- 拆下螺栓 (3) 。
- 将螺栓 (2) 从发动机支架 (1) 上拆下。
- 需要两个人从前盖处拆下发动机支架 (1) 。 发动机支架 (1) 的重量约为 36 kg (80 lb)。
安装步骤
- 需要两个人将发动机支架 (1) 安置在前盖上。 发动机支架 (1) 的重量约为 36 kg (80 lb)。
Show/hide table
图 2 | g01243866 |
- 安装螺栓 (2) 。
- 安装螺栓 (3) 。
End By:
- 安装减振器和皮带轮。 请参阅 拆解和组装, "减振器和皮带轮 - 拆卸和安装"。
- 安装散热器风扇。 请参阅 拆解和组装, "风扇 - 拆卸和安装"。
Caterpillar Information System:
C7 Marine Engines Fuel Pressure Sensor - Remove and Install
C7 Marine Engines Engine Oil Pressure Sensor - Remove and Install
C15 and C18 Generator Set Engines Pump Drive - Assemble
C15 and C18 Generator Set Engines Pump Drive - Disassemble
3508C, 3512C and 3516C Marine Engines Crankshaft - Remove
C9 Marine Engines and C9 Marine Generator Sets Cylinder Head Valves
C175 Generator Sets Before Starting Engine
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Product Installation
Cleaning Fluid-Carrying Hose and Tube Assemblies In Shop and Field Applications {0645, 5050} Cleaning Fluid-Carrying Hose and Tube Assemblies In Shop and Field Applications {0645, 5050}
C7 Marine Engines Speed/Timing Sensor - Remove and Install
3512C and 3516C Engines Customer Parameters Worksheet
3512C and 3516C Engines System Configuration Parameters
C15 On-Highway Engine Variable Valve Actuator
3508C, 3512C and 3516C Marine Engines Crankshaft - Install
2006/03/27 Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
EMCP3 Engine Speed Timing Calibration - Setup
C13, C15, and C18 Tier 4 Final Engines Flywheel Housing
C4.4 Marine Generator Set Walk-Around Inspection
C175 Generator Sets Cold Weather Starting
770 and 772 Off-Highway Truck Power Train Temperature Sensor (Transmission Oil)
C175 Generator Sets Emergency Stopping
C175 Generator Sets Starting the Engine
C15 and C18 Generator Set Engines Engine - Remove
C18 Industrial Engines Model View Illustrations