Fuel Temperature Sensor - Remove and Install
Removal Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect harness assembly (1) .
Show/hide table
 | |
| Illustration 1 | g01243394 |
- Remove fuel temperature sensor (2) .
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 4C-4030 | Thread Lock Compound | 1 |
- Apply Tooling (A) to the threads of fuel temperature sensor (2) .
Show/hide table
| | |
| Illustration 2 | g01243394 |
- Install fuel temperature sensor (2) .
- Tighten fuel temperature sensor (2) to a torque of 20 ± 5 N·m (15 ± 4 lb ft).
- Connect harness assembly (1) .
Caterpillar Information System:
C7 Marine Engines Boost Pressure Sensor - Remove and Install
C7 Marine Engines Coolant Temperature Sensor - Remove and Install
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Speed Sensor (Transmission)
3508C, 3512C and 3516C Marine Engines Camshaft - Install
2006/04/03 Improved Bracket for the Aftercooler Water Lines {1063}
3508C, 3512C and 3516C Marine Engines Camshaft - Remove
3508C, 3512C and 3516C Marine Engines Cylinder Liner - Install
C15 and C18 Generator Set Engines Fuel Transfer Pump - Install
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Output Transfer Yoke
C9 Marine Engines and C9 Marine Generator Sets Cylinder Head Valves
2006/03/20 A New Replacement Kit for the Bezel is Now Used on the Integrated Control Head {1915}
C15 and C18 Generator Set Engines Fuel Transfer Pump - Remove
C7 Marine Engines Injection Actuation Pressure Sensor - Remove and Install
3512C and 3516C Engines System Configuration Parameters
3512C and 3516C Engines Customer Parameters Worksheet
C7 Marine Engines Speed/Timing Sensor - Remove and Install
Cleaning Fluid-Carrying Hose and Tube Assemblies In Shop and Field Applications {0645, 5050} Cleaning Fluid-Carrying Hose and Tube Assemblies In Shop and Field Applications {0645, 5050}
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Product Installation
C175 Generator Sets Before Starting Engine
C9 Marine Engines and C9 Marine Generator Sets Cylinder Head Valves
3508C, 3512C and 3516C Marine Engines Crankshaft - Remove
C15 and C18 Generator Set Engines Pump Drive - Disassemble
C15 and C18 Generator Set Engines Pump Drive - Assemble
C7 Marine Engines Engine Oil Pressure Sensor - Remove and Install