Output Transfer Yoke
Show/hide table
 | |
| Illustration 1 | g01655594 |
(1) Apply 9S-3263 Thread Lock Compound to the end of the threads on 8T-0649 Bolt .
(2) Tighten the 8T-0649 Bolt to the following torque. ... 270 ± 40 N·m (199 ± 29 lb ft)
(3) Transmission output yoke
9C (250-2932)
9C (313-9513) (20 degree maximum articulation angle)
1710 (250-5740)
1810 (260-7778)
1810 Companion flange (304-9004)
Caterpillar Information System:
C9 Marine Engines and C9 Marine Generator Sets Cylinder Head Valves
2006/03/20 A New Replacement Kit for the Bezel is Now Used on the Integrated Control Head {1915}
C15 and C18 Generator Set Engines Fuel Transfer Pump - Remove
C175 Generator Sets Engine Stopping
C15 and C18 Generator Set Engines Pump Drive - Install
C15 and C18 Generator Set Engines Pump Drive - Remove
C3.3 Industrial Engine Exhaust Elbow - Remove and Install - If Equipped
C15 and C18 Generator Set Engines Fan Drive - Install
C3.3 Industrial Engine Air Inlet and Exhaust System - Inspect
3508C, 3512C and 3516C Marine Engines Engine Oil Sequence Valves - Remove and Install
C15 and C18 Generator Set Engines Fan Drive - Remove
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Pump (High Pressure) - Remove and Install
C15 and C18 Generator Set Engines Fuel Transfer Pump - Install
3508C, 3512C and 3516C Marine Engines Cylinder Liner - Install
3508C, 3512C and 3516C Marine Engines Camshaft - Remove
2006/04/03 Improved Bracket for the Aftercooler Water Lines {1063}
3508C, 3512C and 3516C Marine Engines Camshaft - Install
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Speed Sensor (Transmission)
C7 Marine Engines Coolant Temperature Sensor - Remove and Install
C7 Marine Engines Boost Pressure Sensor - Remove and Install
C7 Marine Engines Fuel Temperature Sensor - Remove and Install
C7 Marine Engines Injection Actuation Pressure Sensor - Remove and Install
3512C and 3516C Engines System Configuration Parameters
3512C and 3516C Engines Customer Parameters Worksheet