Engine Stopping
发动机部件的过热和加速磨损可能是由发动机在有负载下运行后的立即停机造成的。 可以将冷却期编程为自动处理。 有关为冷却期编程的信息，请参见系统操作、故障判断、测试和调整, RENR7902, "电子控制模块（发电机组）- 配置"。
为避免由于不正确的发动机冷却而引发的故障，建议冷却期为五分钟。 这可以让发动机中的高温部位逐渐冷却下来。
Caterpillar Information System:
C15 and C18 Generator Set Engines Pump Drive - Install
C15 and C18 Generator Set Engines Pump Drive - Remove
C3.3 Industrial Engine Exhaust Elbow - Remove and Install - If Equipped
C15 and C18 Generator Set Engines Fan Drive - Install
C3.3 Industrial Engine Air Inlet and Exhaust System - Inspect
3508C, 3512C and 3516C Marine Engines Engine Oil Sequence Valves - Remove and Install
C15 and C18 Generator Set Engines Fan Drive - Remove
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Pump (High Pressure) - Remove and Install
3512C and 3516C Engines Analog Sensor (Passive)
3176C and 3196 Engines for Caterpillar Built Machines Belt Tensioner
C175 Generator Set Engines Air Inlet Manifold - Remove and Install
3512C and 3516C Engines Sensor Supply
C15 and C18 Generator Set Engines Fuel Transfer Pump - Remove
2006/03/20 A New Replacement Kit for the Bezel is Now Used on the Integrated Control Head {1915}
C9 Marine Engines and C9 Marine Generator Sets Cylinder Head Valves
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Output Transfer Yoke
C15 and C18 Generator Set Engines Fuel Transfer Pump - Install
3508C, 3512C and 3516C Marine Engines Cylinder Liner - Install
3508C, 3512C and 3516C Marine Engines Camshaft - Remove
2006/04/03 Improved Bracket for the Aftercooler Water Lines {1063}
3508C, 3512C and 3516C Marine Engines Camshaft - Install
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Speed Sensor (Transmission)
C7 Marine Engines Coolant Temperature Sensor - Remove and Install
C7 Marine Engines Boost Pressure Sensor - Remove and Install