Fan Drive - Install
安装步骤
- 将支架组件 (2) 安置在前壳体上。 安装螺栓 (6) 和螺母 (3) 。
Show/hide table
 | |
| 图 1 | g01242624 |
- 将 V 型皮带安装在皮带轮 (4) 上。
- 顺时针转动螺栓 (1) 以便将螺栓拧入适配器 (5) 。
- 调整 V 型皮带的张力。 请参阅技术规格手册, "皮带张紧度表"。
End By: 安装散热器风扇。 请参阅 拆解和组装, "风扇 - 拆卸和安装"。
Caterpillar Information System:
C3.3 Industrial Engine Air Inlet and Exhaust System - Inspect
3508C, 3512C and 3516C Marine Engines Engine Oil Sequence Valves - Remove and Install
C15 and C18 Generator Set Engines Fan Drive - Remove
C175-16 and C175-20 Engines for Caterpillar Built Machines Fuel Pump (High Pressure) - Remove and Install
3512C and 3516C Engines Analog Sensor (Passive)
3176C and 3196 Engines for Caterpillar Built Machines Belt Tensioner
C175 Generator Set Engines Air Inlet Manifold - Remove and Install
3512C and 3516C Engines Sensor Supply
C15 and C18 Generator Set Engines Electric Starting Motor - Remove and Install
C175 Generator Set Engines Engine Oil Pump - Install
C15 and C18 Generator Set Engines CID 0091 FMI 08 Throttle Position signal abnormal
C3.3 and C4.4 Rental Generator Sets Additional Messages
C3.3 Industrial Engine Exhaust Elbow - Remove and Install - If Equipped
C15 and C18 Generator Set Engines Pump Drive - Remove
C15 and C18 Generator Set Engines Pump Drive - Install
C175 Generator Sets Engine Stopping
C15 and C18 Generator Set Engines Fuel Transfer Pump - Remove
2006/03/20 A New Replacement Kit for the Bezel is Now Used on the Integrated Control Head {1915}
C9 Marine Engines and C9 Marine Generator Sets Cylinder Head Valves
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Output Transfer Yoke
C15 and C18 Generator Set Engines Fuel Transfer Pump - Install
3508C, 3512C and 3516C Marine Engines Cylinder Liner - Install
3508C, 3512C and 3516C Marine Engines Camshaft - Remove
2006/04/03 Improved Bracket for the Aftercooler Water Lines {1063}