Engine Oil Cooler - Remove
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the engine into a suitable container. Drain the engine oil from the engine into a suitable container. Refer to the Operation and Maintenance Manual for the procedure on draining the engine coolant and the engine oil.
- Remove the hose clamp and the hose from the coolant inlet (1). Remove the hose clamp and the hose from the coolant outlet (2).
- Remove the adapter (3) from the oil cooler body (4).
- Remove the O-rings (5) and (6). Discard the O-rings (5) and (6).
- Remove the sealing ring (7). Discard the sealing ring (7).
- If necessary, remove the setscrews (8) in order to remove the oil cooler base (9) from the cylinder block. Remove the joint from the cylinder block. Discard the joint.
Show/hide table
| |
| Illustration 1 | g01041195 |
Show/hide table
| |
| Illustration 2 | g01041194 |
Caterpillar Information System:
C6.6 Generator Set Indicator Lamp Circuit - Test
C6.6 Generator Set Injector Solenoid Circuit - Test
C3.3 Industrial Engine Finding Top Center Position for No. 1 Piston
3126B and 3126E Truck Engines Fan Drive
C6.6 Engines for Caterpillar Built Machines Engine Oil Filter Base
3126B and 3126E Truck Engines Belt Tensioner
2006/02/13 Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
C11 and C15 Engines for Caterpillar Built Machines E362 Engine Overspeed
Incorrect SENS Battery Chargers Installed on Griffin-Packaged 3306, 3406, 3412, 3456, G3406 and G3412 Engine Generator Sets{1401} Incorrect SENS Battery Chargers Installed on Griffin-Packaged 3306, 3406, 3412, 3456, G3406 and G3412 Engine Generator Sets{1401}
3126B and 3126E Truck Engines Belt Tensioner
C11 and C13 Petroleum Engines Monitoring System - If Equipped
3512B Oil Well Servicing Engine (ADEM III) CAN Data Link
C3.3 Industrial Engine Engine Oil Cooler - Install
C280 Marine and Petroleum Engines Engine Speed/Timing Wheel
C3.3 Industrial Engine Engine Oil Pump - Remove
C3.3 Industrial Engine Engine Oil Pump - Install
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Joystick Controls Alternate Patterns - If Equipped
2006/01/02 Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1000, 1254}
2006/02/01 Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1250}
C6.6 Engines for Caterpillar Built Machines Engine Oil Pump
C6.6 Engines for Caterpillar Built Machines Water Pump
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant Leakage - Test
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning System
2006/01/02 Troubleshooting Engines with Mechanical Unit Injection (MUI) {1000, 1254}