Engine Oil Filter Base
Show/hide table
Illustration 1 | g01233926 |
(1) Engine oil filter base
(2) Bolts
- Tighten the bolts to the following torque. ...
22 N·m (16 ft)
(3) Hand tighten the oil filter. Then turn an additional 3/4 turn.
Tighten the plug (not shown) to the following torque. ...
If necessary, tighten the oil sampling valve to a torque of
Caterpillar Information System:
3126B and 3126E Truck Engines Belt Tensioner
2006/02/13 Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
C11 and C15 Engines for Caterpillar Built Machines E362 Engine Overspeed
Incorrect SENS Battery Chargers Installed on Griffin-Packaged 3306, 3406, 3412, 3456, G3406 and G3412 Engine Generator Sets{1401} Incorrect SENS Battery Chargers Installed on Griffin-Packaged 3306, 3406, 3412, 3456, G3406 and G3412 Engine Generator Sets{1401}
3126B and 3126E Truck Engines Belt Tensioner
C11 and C13 Petroleum Engines Monitoring System - If Equipped
3512B Oil Well Servicing Engine (ADEM III) CAN Data Link
C6.6 Generator Set Speed Demand Input Setup
C6.6 Generator Set Glossary
2006/01/16 Torque the Engine Oil Filter Base Properly {1306}
2006/01/01 Torque the Engine Oil Filter Base Properly {1306}
3500 Locomotive Engines Governor - Electronic Governors
3126B and 3126E Truck Engines Fan Drive
C3.3 Industrial Engine Finding Top Center Position for No. 1 Piston
C6.6 Generator Set Injector Solenoid Circuit - Test
C6.6 Generator Set Indicator Lamp Circuit - Test
C3.3 Industrial Engine Engine Oil Cooler - Remove
C3.3 Industrial Engine Engine Oil Cooler - Install
C280 Marine and Petroleum Engines Engine Speed/Timing Wheel
C3.3 Industrial Engine Engine Oil Pump - Remove
C3.3 Industrial Engine Engine Oil Pump - Install
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Joystick Controls Alternate Patterns - If Equipped
2006/01/02 Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1000, 1254}
2006/02/01 Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1250}