3126B and 3126E Truck Engines Caterpillar


Fan Drive

Usage:

3126B 7AS



Illustration 1g01234006

(1) Use the grease fitting to fill the bearing cavity with 30 grams (1.05 ounces) of 8T-1807 Bearing Lubricant. Apply the grease to the bearing cavity after installing fan drive bearings.

(2) Bearing assembly

(3) Bracket

(4) Bolt

(5) Bolt

(6) Support

Assembly procedure for the bracket

  1. Tighten bolt (4) by hand into the housing.

  1. Tighten bolt (5) by hand into the bracket (2) .

  1. Tighten bolts (4) and (5) .

    Tighten the bolts to the following torque. ... 55 ± 10 N·m (40 ± 7 lb ft)

Caterpillar Information System:

C6.6 Engines for Caterpillar Built Machines Engine Oil Filter Base
3126B and 3126E Truck Engines Belt Tensioner
2006/02/13 Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
C11 and C15 Engines for Caterpillar Built Machines E362 Engine Overspeed
Incorrect SENS Battery Chargers Installed on Griffin-Packaged 3306, 3406, 3412, 3456, G3406 and G3412 Engine Generator Sets{1401} Incorrect SENS Battery Chargers Installed on Griffin-Packaged 3306, 3406, 3412, 3456, G3406 and G3412 Engine Generator Sets{1401}
3126B and 3126E Truck Engines Belt Tensioner
C11 and C13 Petroleum Engines Monitoring System - If Equipped
3512B Oil Well Servicing Engine (ADEM III) CAN Data Link
C6.6 Generator Set Speed Demand Input Setup
C6.6 Generator Set Glossary
2006/01/16 Torque the Engine Oil Filter Base Properly {1306}
2006/01/01 Torque the Engine Oil Filter Base Properly {1306}
C3.3 Industrial Engine Finding Top Center Position for No. 1 Piston
C6.6 Generator Set Injector Solenoid Circuit - Test
C6.6 Generator Set Indicator Lamp Circuit - Test
C3.3 Industrial Engine Engine Oil Cooler - Remove
C3.3 Industrial Engine Engine Oil Cooler - Install
C280 Marine and Petroleum Engines Engine Speed/Timing Wheel
C3.3 Industrial Engine Engine Oil Pump - Remove
C3.3 Industrial Engine Engine Oil Pump - Install
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Joystick Controls Alternate Patterns - If Equipped
2006/01/02 Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1000, 1254}
2006/02/01 Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1250}
C6.6 Engines for Caterpillar Built Machines Engine Oil Pump
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.