Belt Tensioner
Show/hide table
Illustration 1 | g01233637 |
(1) Spring force at assembly 59.9 ± 6.0 N·m (44 ± 4 lb ft) at 36 degrees from the free arm stop
(2) Limited travel ... 71 degrees (minimum)
Caterpillar Information System:
C11 and C13 Petroleum Engines Monitoring System - If Equipped
3512B Oil Well Servicing Engine (ADEM III) CAN Data Link
C6.6 Generator Set Speed Demand Input Setup
C6.6 Generator Set Glossary
2006/01/16 Torque the Engine Oil Filter Base Properly {1306}
2006/01/01 Torque the Engine Oil Filter Base Properly {1306}
3500 Locomotive Engines Governor - Electronic Governors
2006/01/02 The Improved Controller For Marine Auxiliary Gensets Is Available {4490, 7451}
3512B Oil Well Servicing Engine (ADEM III) ECM Will Not Communicate with Other Systems or Display Modules
2006/01/02 New Guidelines for Inspecting Pistons {1214}
2006/01/02 Torque the Engine Oil Filter Base Properly {1306}
3512B Oil Well Servicing Engine (ADEM III) Crankcase Pressure (High)
Incorrect SENS Battery Chargers Installed on Griffin-Packaged 3306, 3406, 3412, 3456, G3406 and G3412 Engine Generator Sets{1401} Incorrect SENS Battery Chargers Installed on Griffin-Packaged 3306, 3406, 3412, 3456, G3406 and G3412 Engine Generator Sets{1401}
C11 and C15 Engines for Caterpillar Built Machines E362 Engine Overspeed
2006/02/13 Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
3126B and 3126E Truck Engines Belt Tensioner
C6.6 Engines for Caterpillar Built Machines Engine Oil Filter Base
3126B and 3126E Truck Engines Fan Drive
C3.3 Industrial Engine Finding Top Center Position for No. 1 Piston
C6.6 Generator Set Injector Solenoid Circuit - Test
C6.6 Generator Set Indicator Lamp Circuit - Test
C3.3 Industrial Engine Engine Oil Cooler - Remove
C3.3 Industrial Engine Engine Oil Cooler - Install
C280 Marine and Petroleum Engines Engine Speed/Timing Wheel