Electrical Connectors and Functions
Electronic Control Module (ECM)
Show/hide table
| |
| Illustration 1 | g01232788 |
|
ECM and connectors for the ECM | |
Engine Harness Connector and Customer Connector
Show/hide table
| |
| Illustration 2 | g01232869 |
|
40 pinengine harness connector and customer connector | |
Service Tool Connector for Cat ET
Show/hide table
| |
| Illustration 3 | g01232902 |
|
Service tool connector | |
Show/hide table
| |
| Illustration 4 | g01159881 |
|
Typical 3-pin connector | |
Show/hide table
| |
| Illustration 5 | g01155187 |
|
Typical 2-pin connector | |
Caterpillar Information System:
CX31 On-Highway Transmission Power Train Torque Converter - Remove
C6.6 Generator Set Speed Control (Analog) - Test
C6.6 Marine Generator Set Low Power
CX31 On-Highway Transmission Power Train Torque Converter - Install
C6.6 Marine Generator Set Intermittent Low Power or Power Cutout
C6.6 Generator Set Engine Misfires, Runs Rough or Is Unstable
Oil Pan and Joint{1302, 7555} Oil Pan and Joint{1302, 7555}
C6.6 Generator Set Can Not Reach Top Engine RPM
3126B and 3126E Truck Engines Crankshaft Pulley
3126B and 3126E Truck Engines Engine to Transmission Adapter - If Equipped
C6.6 Generator Set CID 1785 FMI 04
C6.6 Generator Set CID 1785 FMI 03
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056} Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
CX31 On-Highway Transmission Power Train Torque Converter Housing - Remove
CX31 On-Highway Transmission Power Train Torque Converter Housing - Install
3126B and 3126E Truck Engines Belt Tensioner
3500 Locomotive Engines Jacket Water Cooling Circuit
3126B and 3126E Truck Engines Belt Tensioner
C6.6 Engines for Caterpillar Built Machines Vibration Damper and Pulley
3512B Oil Well Servicing Engine (ADEM III) Start/Run/Stop Switch
DE Series Generator Set With Cat C7.1 Engine Additional Messages
C11 and C13 Petroleum Engines Monitoring System - If Equipped
3512B Oil Well Servicing Engine (ADEM III) Boost Pressure Above Normal
C6.6 Generator Set Speed Control (PWM) - Test