Torque Converter - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7574 | 连杆支架 | 3 |
| B | 1P-2420 | 变速箱修复台 | 1 |
开始:
- 卸下变速箱。 参考拆解和装配, "变速箱 - 拆卸"。
注: 清洁度是一项重要的因素。 拆解步骤开始之前，应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将工具 (A) 和适当的起吊设备连接在变速箱 (1) 上。 将变速箱 (1) 放置在工具 (B) 上。 变速箱 (1) 的重量约为 544 kg (1200 lb)。
Show/hide table
 | |
| 图 1 | g01232666 |
- 拆下螺塞 (2) 和螺栓 (3) 。
Show/hide table
 | |
| 图 2 | g01232667 |
Show/hide table
 | |
| 图 3 | g01298456 |
- 将工具 (A) 和适当的起吊设备连接到变矩器 (4) 上。 变矩器 (4) 的重量约为 125 kg (275 lb)。 拆卸变矩器 (4) 。
Show/hide table
 | |
| 图 4 | g01298457 |
Caterpillar Information System:
C6.6 Generator Set Speed Control (Analog) - Test
C6.6 Marine Generator Set Low Power
CX31 On-Highway Transmission Power Train Torque Converter - Install
C6.6 Marine Generator Set Intermittent Low Power or Power Cutout
C6.6 Generator Set Engine Misfires, Runs Rough or Is Unstable
Oil Pan and Joint{1302, 7555} Oil Pan and Joint{1302, 7555}
C6.6 Generator Set Can Not Reach Top Engine RPM
3126B and 3126E Truck Engines Crankshaft Pulley
3126B and 3126E Truck Engines Engine to Transmission Adapter - If Equipped
C6.6 Generator Set CID 1785 FMI 04
C6.6 Generator Set CID 1785 FMI 03
C6.6 Engines for Caterpillar Built Machines Engine Oil Cooler
3512B Oil Well Servicing Engine (ADEM III) Electrical Connectors and Functions
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056} Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
CX31 On-Highway Transmission Power Train Torque Converter Housing - Remove
CX31 On-Highway Transmission Power Train Torque Converter Housing - Install
3126B and 3126E Truck Engines Belt Tensioner
3500 Locomotive Engines Jacket Water Cooling Circuit
3126B and 3126E Truck Engines Belt Tensioner
C6.6 Engines for Caterpillar Built Machines Vibration Damper and Pulley
3512B Oil Well Servicing Engine (ADEM III) Start/Run/Stop Switch
DE Series Generator Set With Cat C7.1 Engine Additional Messages
C11 and C13 Petroleum Engines Monitoring System - If Equipped
3512B Oil Well Servicing Engine (ADEM III) Boost Pressure Above Normal