816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Caterpillar

Operate the machine in each direction and in all speeds. Note the noises that are not normal and find the sources of the noises. If the machine power train is not operating correctly refer to the following topics in the "Symptom Procedures" section for a list of possible problems and corrections.

• Troubleshooting, "Torque Converter"

• Troubleshooting, "Transmission"

• Troubleshooting, "Differential and Final Drive"

The following checks for troubleshooting are set in sequence to find problems and causes quickly.

These checks for troubleshooting should be done in order. Do not go to the next check until the problem in the previous check has been corrected or you are instructed to go to the next check. If the correct result for the check is found, go directly to the next check.

Take note of all warnings and notices in these checks. You must read all the warnings and the notices before you start a check. You must understand all the warnings and the notices before you start a check.

The checks that follow can be used to find many of the problems that may occur during the operation of the machine. The checks that follow can also give an indication of the part of the system that has the problem.