Engine Front Support - Remove and Install
拆卸步骤
开始:
- 拆卸发动机。 请参阅解体与组装, "发动机 - 拆卸"。
- 拆卸曲轴减振器和皮带轮。 请参阅解体与组装, "曲轴减振器和皮带轮 - 拆卸和安装"。
注: 清洁度是一项重要的因素。 开始进行解体步骤之前，必须彻底清洁零部件外部。 这将有助于防止脏污进入内部机构。
- 拆卸曲轴减振器 (1) 。
Show/hide table
 | |
| 图 1 | g01311609 |
- 拆卸减振器适配器 (3) 。 松开螺栓 (2) ，直到螺栓 (2) 突出表面 (Z) 约 3.175 mm (0.125 in)。
Show/hide table
 | |
| 图 2 | g01311610 |
Show/hide table
 | |
| 图 3 | g01308470 |
- 将工具 (A) 连在皮带轮 (4) 上。 使用工具 (A) ，从曲轴上分开皮带轮 (4) 。
- 拆卸螺栓 (5) 。 拆卸前支架 (6) 。
Show/hide table
 | |
| 图 4 | g01311594 |
- 拆下螺栓 (7). 拆卸发动机耳轴 (8) 。
Show/hide table
 | |
| 图 5 | g01311595 |
安装步骤
注: 清洁度是一项重要的因素。 组装之前，应使用清洗剂彻底清洁所有零部件。 让零件风干。 不要使用抹布擦干零部件。 棉绒可能会留在零部件上，从而可能导致以后出现故障。 检验所有零件。 如果任何零件磨损或损坏，则应使用新件更换。
- 定位发动机耳轴 (8) 。 安装螺栓 (7) 。
Show/hide table
| | |
| 图 6 | g01311595 |
- 定位发动机支架 (6) 。 安装螺栓 (5) 。
Show/hide table
| | |
| 图 7 | g01311594 |
- 安装皮带轮 (4) 。 拧紧螺栓 (2) 至扭矩为 312 ± 27 N•m (230 ± 20 lb ft)。 安装减振器适配器 (3) 。
Show/hide table
| | |
| 图 8 | g01311610 |
Show/hide table
 | |
| 图 9 | g01308468 |
Show/hide table
| | |
| 图 10 | g01311609 |
- 安装曲轴减振器 (1) 。
End By:
- 安装曲轴减振器和皮带轮。 请参阅 解体与组装, "曲轴减振器和皮带轮 - 拆卸和安装"。
- 安装发动机。 请参阅 解体与组装, "发动机 - 安装"。
Caterpillar Information System:
D7G and D7G Series II Track-Type Tractors Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Operational Checks (Steering System)
C15 and C18 Petrolem Generator Set Engines Engine Cranks but Does Not Start
D6G Series II Track-Type Tractor Power Train Track Roller Frame - Install
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Operational Checks (Power Train)
3500C Marine Auxiliary Engines Cylinder Is Noisy
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Operational Checks (Hydraulic System)
Repair of the Lift Arm Assembly Crossmember{0679, 6107, 6119} Repair of the Lift Arm Assembly Crossmember{0679, 6107, 6119}
C15 and C18 Petrolem Generator Set Engines Coolant Temperature Is High
D7G and D7G Series II Track-Type Tractors Engine Supplement Engine Oil Filter and Base - Remove and Install
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Operational Checks (Brake System)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Visual Inspection
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Hood - Install
C15 and C18 Petrolem Generator Set Engines Engine Does Not Crank
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Differential and Final Drive
AD55B Underground Articulated Truck Hydraulic System Hydraulic Fan System
AD55B Underground Articulated Truck Braking System Brake Control Valve (Parking)
AD55B Underground Articulated Truck Braking System Relief Valve (Brake Oil Cooler)
AD55B Underground Articulated Truck Braking System Brake Cooling System
2006/10/09 Correction to Specifications, Steering Cylinder {4303}
AD55B Underground Articulated Truck Braking System Pressure Switch (Brake Accumulator Oil)
AD55B Underground Articulated Truck Braking System Pressure Switch (Service Brake Oil)
D6G Series II Track-Type Tractor Power Train Sprocket Hub - Remove
C11 and C13 Engines and 14M and 16M Motor Graders Engine Misfires, Runs Rough or Is Unstable