Engine Oil Filter and Base - Remove and Install
拆卸步骤
注: 清洁度是一项重要的因素。 开始进行解体步骤之前，必须彻底清洁零部件外部。 这将有助于防止脏污进入内部机构。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
注: 在所有线路、软管、导线及管子组件上作出识别标记，以便于安装。 插接好所有线路、软管和管子。 这将有助于防止液体泄漏和有助于防止污染物进入系统。
- 拆卸螺栓 (2) 。 拆卸门 (1) 。
Show/hide table
 | |
| 图 1 | g01308047 |
- 拆卸机油滤清器 (3) 。
Show/hide table
 | |
| 图 2 | g01306638 |
- 拆卸螺栓 (4) 。 拆卸螺栓 (9) 。 拆卸管组件 (5) 。 拆卸管组件 (8) 。 拆卸螺栓 (6) 。 拆卸发动机机油滤清器底座 (7) 。
Show/hide table
 | |
| 图 3 | g01306641 |
Show/hide table
 | |
| 图 4 | g01306639 |
安装步骤
注: 清洁度是一项重要的因素。 组装之前，应使用清洗剂彻底清洁所有零部件。 让零件风干。 不要使用抹布擦干零部件。 棉绒可能会留在零部件上，从而可能导致以后出现故障。 检验所有零件。 如果任何零件磨损或损坏，则应使用新件更换。
- 定位发动机机油滤清器和底座 (7) 。 安装螺栓 (6) 。 安装管组件 (5) 。 安装管组件 (8) 。 安装螺栓 (4) 。 安装螺栓 (9).
Show/hide table
| | |
| 图 5 | g01306639 |
Show/hide table
| | |
| 图 6 | g01306641 |
- 安装机油滤清器 (3) 。
Show/hide table
| | |
| 图 7 | g01306638 |
- 定位门 (1) 。 安装螺栓 (2) 。
Show/hide table
| | |
| 图 8 | g01308047 |
Caterpillar Information System:
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Operational Checks (Brake System)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Visual Inspection
D6N Track-Type Tractor Power Train Troubleshooting
657G Wheel Tractor-Scraper Wheel Tractor Power Train Torque Converter - Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Torque Converter - Remove
963D Track-Type Loader Power Train Piston Pump (Hydrostatic) - Assemble - Right Side
963D Track-Type Loader Power Train Piston Pump (Hydrostatic) - Disassemble - Right Side
963D Track-Type Loader Power Train Piston Pump (Hydrostatic) - Assemble - Left Side
963D Track-Type Loader Power Train Piston Pump (Hydrostatic) - Disassemble - Left Side
D6N Track-Type Tractor Power Train Engagement Pressure for the Transmission Clutch - Calibrate
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator
D6G Series II Track-Type Tractor Power Train Track Roller Frame - Remove
C15 and C18 Petrolem Generator Set Engines Coolant Temperature Is High
Repair of the Lift Arm Assembly Crossmember{0679, 6107, 6119} Repair of the Lift Arm Assembly Crossmember{0679, 6107, 6119}
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Operational Checks (Hydraulic System)
3500C Marine Auxiliary Engines Cylinder Is Noisy
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Operational Checks (Power Train)
D6G Series II Track-Type Tractor Power Train Track Roller Frame - Install
C15 and C18 Petrolem Generator Set Engines Engine Cranks but Does Not Start
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Operational Checks (Steering System)
D7G and D7G Series II Track-Type Tractors Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
D7G and D7G Series II Track-Type Tractors Engine Supplement Engine Front Support - Remove and Install
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Supplement Hood - Install
C15 and C18 Petrolem Generator Set Engines Engine Does Not Crank