Torque Converter - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7575     | 连杆支架     | 2     |
B     | 1P-2420     | 变速箱修复台     | 1     |
C     | -     | 1/2 - 13 × 3 in 顶出螺栓     |
2     |
开始:
- 分离变速箱与分动器。 请参阅拆解和组装, "变速箱与分动器 - 分离"。
- 将工具 (A) 和适当的起吊设备装在变速箱组件 (1) 上。 变速箱组件 (1) 的重量约为 2132 kg (4700 lb)。 将变速箱组件 (1) 安装在工具 (B) 上。
Show/hide table
图 1 | g01306580 |
- 卸下 O 形密封圈 (3) 。 拆下螺栓 (2) 。
Show/hide table
图 2 | g01306581 |
- 将工具 (A) 和适当的起吊设备连接在行星齿轮组件 (4) 上。 行星齿轮组件 (4) 的重量约为 533 kg (1175 lb)。 使用工具 (C) 、工具 (A) 和适当的起吊设备,卸下行星齿轮组件 (4) 。
Show/hide table
图 3 | g01306583 |
- 卸下防护罩 (5) 。 卸下两个螺栓 (6) ,将工具 (A) 和适当的起吊设备连接在行星齿轮组件 (7) 上。 行星齿轮组件 (7) 的重量约为 381 kg (840 lb)。
Show/hide table
图 4 | g01306657 |
Show/hide table
图 5 | g01306658 |
- 卸下螺栓 (8) 和行星齿轮组件 (7) 。
- 在适当的支座上翻转行星齿轮组件 (7) 。 将工具 (A) 和适当的起吊设备连接在变矩器 (9) 上。 变矩器 (9) 的重量约为 125 kg (275 lb)。
Show/hide table
图 6 | g01306661 |
Show/hide table
图 7 | g01306662 |
注: 在拆卸挡圈 (11) 之前必须使用适当的支座支撑轴 (13) 。
- 卸下挡圈 (11) 和垫圈 (12) 。 卸下螺母 (10) 和变矩器 (9) 。
Caterpillar Information System:
963D Track-Type Loader Power Train Piston Pump (Hydrostatic) - Assemble - Right Side
963D Track-Type Loader Power Train Piston Pump (Hydrostatic) - Disassemble - Right Side
963D Track-Type Loader Power Train Piston Pump (Hydrostatic) - Assemble - Left Side
963D Track-Type Loader Power Train Piston Pump (Hydrostatic) - Disassemble - Left Side
D6N Track-Type Tractor Power Train Engagement Pressure for the Transmission Clutch - Calibrate
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator
D6G Series II Track-Type Tractor Power Train Track Roller Frame - Remove
D7G and D7G Series II Track-Type Tractors Engine Supplement Muffler - Remove and Install
2006/10/02 Improved Clamps to Secure Cable from Sliding {1408}
AD55B Underground Articulated Truck Hydraulic System Hydraulic Tank
AD55B Underground Articulated Truck Hydraulic System General Information
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Differential Pinion Preload - Adjust
657G Wheel Tractor-Scraper Wheel Tractor Power Train Torque Converter - Install
D6N Track-Type Tractor Power Train Troubleshooting
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Visual Inspection
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Operational Checks (Brake System)
D7G and D7G Series II Track-Type Tractors Engine Supplement Engine Oil Filter and Base - Remove and Install
C15 and C18 Petrolem Generator Set Engines Coolant Temperature Is High
Repair of the Lift Arm Assembly Crossmember{0679, 6107, 6119} Repair of the Lift Arm Assembly Crossmember{0679, 6107, 6119}
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Operational Checks (Hydraulic System)
3500C Marine Auxiliary Engines Cylinder Is Noisy
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Operational Checks (Power Train)
D6G Series II Track-Type Tractor Power Train Track Roller Frame - Install
C15 and C18 Petrolem Generator Set Engines Engine Cranks but Does Not Start