AD55B Underground Articulated Truck Caterpillar


Stopping the Engine

Usage:

AD55B JNW

  • Parkir alat berat pada permukaan yang rata. Untuk prosedur yang direkomendasikan, baca Buku Petunjuk Pengoperasian dan Perawatan, "Menghentikan Alat Berat".


      PERHATIAN

      Mematikan engine dengan segera setelah bekerja dengan beban dapat mengakibatkan panas yang berlebihan serta keausan yang lebih cepat pada komponen-komponen engine.

      Apabila engine telah dioperasikan pada rpm yang tinggi dan/atau beban yang besar, jalankan engine pada kecepatan terendah selama sedikitnya tiga menit untuk mengurangi dan menstabilkan temperatur internal engine sebelum mematikan engine.

      Menghindari pemberhentian engine sewaktu masih panas akan memaksimalkan umur pemakaian poros turbocharger dan bantalan.


    1. Agar engine dapat menjadi dingin secara perlahan, operasikan engine pada idle rendah selama tiga menit.



      Ilustrasi 1g01417732

    1. Putar kunci sakelar start engine ke posisi (1) ke posisi OFF untuk menghentikan engine.


      PERHATIAN

      Jangan memutar sakelar pemutus hubungan baterai ke posisi OFF sementara engine sedang hidup. Kerusakan sistem kelistrikan dapat terjadi.


    1. Jika memarkir alat berat, gunakan ganjal roda.
  • Caterpillar Information System:

    AD55B Underground Articulated Truck Stopping the Machine
    G3600 Engines Symptom Troubleshooting
    G3600 Engines Programmable Parameters
    G3520C and G3520E Generator Set Engines Welding Precaution
    2006/10/02 Updated Track Guide Guards {4177}
    814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Brake and Planetary
    C13 Engines for Caterpillar Built Machines Engine Misfires, Runs Rough or Is Unstable
    C175-16 Locomotive Engine Pressure Sensor
    621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Sensors
    621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Switches
    621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Electronic Control Module (ECM)
    D7G and D7G Series II Track-Type Tractors Power Train Transmission Lubrication Relief Valve - Install
    AD55B Underground Articulated Truck Lifting and Tying Down the Machine
    G3520C and G3520E Generator Set Engines Turbocharger Turbine Temperature Is Low
    AD55B Underground Articulated Truck Tire Shipping Pressure
    AD55B Underground Articulated Truck Capacities (Refill)
    AD55B Underground Articulated Truck Filter and Screen Locations
    AD55B Underground Articulated Truck Sampling Interval and Location of Sampling Valve
    AD55B Underground Articulated Truck Backup Alarm - Test
    AD55B Underground Articulated Truck Battery Electrolyte Level - Check
    D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Install
    D6G Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Inlet) - Install
    D6G Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet) - Install
    C-9 Engine for D6R Series II Track-Type Tractor CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.