Engine Crankcase Breather - Clean
Breather karter engine terletak di bagian atas di samping kiri engine.
- Kendorkan klem selang keluaran breather (3) dan lepaskan selang dari penutup breather.
Show/hide table
 | |
| Ilustrasi 1 | g01283504 |
- Kendorkan baut penahan breather (1) dan lepaskan breather (3) .
- Periksa seal pada breather. Ganti seal pada breather apabila seal pada breather telah rusak.
- Cuci breather dalam larutan yang bersih dan tidak mudah terbakar.
- Gunakan udara bertekanan untuk mengeringkan.
- Pasang breather yang telah bersih (3) .
- Kencangkan baut penahan breather (2) pada torsi 14 ± 3 n·m (10 ± 2 lb ft).
- Pasang selang ke breather (3) dan kencangkan klem selang (2) .
Caterpillar Information System:
2006/11/27 The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Transmission Hydraulic System
D6G Series 2 Track-Type Tractor Engine Oil and Filter - Change
657G Wheel Tractor-Scraper Wheel Tractor Power Train Speed Sensor (Transmission) - Assemble
657G Wheel Tractor-Scraper Wheel Tractor Power Train Speed Sensor (Transmission) - Disassemble
657G Wheel Tractor-Scraper Wheel Tractor Power Train Retarder and Transfer Gear - Assemble
2006/07/24 An Additional Bracket Strengthens the Oil Filler Tube For the Transmission {3005, 3030}
C6.6 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
953D Track-Type Loader Engine Supplement Engine - Install
D5R Track-Type Tractor Power Train Track Carrier Roller
953D Track-Type Loader Engine Supplement Engine - Remove
D6G Series 2 Track-Type Tractor Power Train Gear Pump (Transmission) Flow - Test
D6G Series 2 Track-Type Tractor Engine Air Precleaner - Clean
D6G Series 2 Track-Type Tractor Power Train Steering Control Valve - Test and Adjust
D6G Series 2 Track-Type Tractor Power Train Brake System - Test and Adjust
D6G Series 2 Track-Type Tractor Engine Air Filter Primary Element - Clean/Replace
631G and 637G Wheel Tractor-Scrapers Machine Systems Fan Drive
953K Track-Type Loader Power Train Pump Drive Coupling - Remove and Install
953D Track-Type Loader Machine Systems Pump Mounting - Install
D6G Series 2 Track-Type Tractor Power Train Transmission Control Linkage - Adjust
D6G Series 2 Track-Type Tractor Cutting Edges and End Bits - Inspect/Replace
D6N Track-Type Tractor Power Train Torque Converter and Pump Drive Housing
D6G Series 2 Track-Type Tractor Cooling System Coolant Level - Check
D6G Series 2 Track-Type Tractor Cooling System Coolant Extender (ELC) - Add