Oil Filter (Charge Pump)
Show/hide table
Illustration 1 | g01733948 |
Bypass valve setting ... 345 kPa (50 psi)
(1) Torque for the switch ... 6.78 ± 1.41 N·m (60 ± 12 lb in)
(A) Minimum bottom clearance that is required to remove the filter assembly ... 23.1 mm (0.91 inch)
Caterpillar Information System:
AccuGrade® GPS (CD700) Avoidance Zone - Set
631G and 637G Wheel Tractor-Scrapers Machine Systems Cushion-Hitch - Install
854K Wheel Dozer Hydraulic System Oil (Implement) (Hydraulic Fan) - Change
AccuGrade® GPS (CD700) Configuration - Machine Radio
AccuGrade® GPS (CD700) Configuration - Receiver
AccuGrade® GPS (CD700) Configuration - Sensor Calibration
AccuGrade® GPS (CD700) Configuration
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders CAN Data Link Circuit - Test
AccuGrade® GPS (CD700) Automatic Control System
C4.4 Industrial Engine Fuel Injection Timing - Check
2006/05/15 New Crankshaft Front Seal {1160}
AccuGrade® GPS (CD700) Sloping Surface Design
D6N Track-Type Tractor Hydraulic System Oil Filter (Case Drain)
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Pilot Operated Hydraulic Control
AccuGrade® GPS (CD700) Beeper - Set
525C, 535C and 545C Wheel Skidders Machine Systems Hydraulic Rotator - Remove
525C, 535C and 545C Wheel Skidders Machine Systems Hydraulic Rotator - Install
AccuGrade® GPS (CD700) Blade Wear - Set
AccuGrade® GPS (CD700) Brightness (Display and Light Bar) - Set
AccuGrade® GPS (CD700) Diagnostics - View
AccuGrade® GPS (CD700) GPS Accuracy Mode - Set
AccuGrade® GPS (CD700) Increment Switch - Set
Procedure to Reroute the Front Harness {5734} Procedure to Reroute the Front Harness {5734}
525C, 535C and 545C Wheel Skidders Power Train Torque Converter and Transmission - Remove