Output Transfer Gears
Show/hide table
Illustration 1 | g02939876 |
Front view |
Show/hide table
Specification for 249-8173 Output Transfer Gear Gp and 249-8175 Output Transfer Gear Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 2     | 193-2550 Speed Sensor Gp     | Final installation torque is 25 ± 5 N·m (221 ± 44 lb in).     |
2     | 19     | 6V-4248 Bolt     | Torque to 60 ± 12 N·m (44 ± 9 lb ft).     |
3     | 10     | 6V-1820 Bolt     | Torque to 70 ± 15 N·m (52 ± 11 lb ft).     |
4     | 1     | 6V-1720 Serial Number Plate     | Apply Loctite 330.     |
5     | 1     | 129-6329 Lever     | Push lever to make certain that the brake cam is in contact with the brake shoes when setting the lever position to the dimension of (D) .     |
D     | -     | -     | Dimension is 56 ± 15 mm (2.2 ± 0.6 inch).     |
Show/hide table
Illustration 2 | g02939917 |
Show/hide table
Item     | Qty     | Part     | Specification Description     |
6     | 1     | 7S-8554 O-Ring Seal     | Lubricate bore lightly with lubricant that is being sealed.     |
7     | 2     | 193-2200 Lip Type Seal     | Lubricate sealing lip lightly with lubricant that is being sealed. Install seal flush with face of bearing cage.     |
8     | 1     | 5F-3144 O-Ring Seal     | Lubricate bore lightly with lubricant that is being sealed.     |
9     | 1     | As required, use the following shim pack in order to obtain end play of 0.10 ± 0.05 mm (0.004 ± 0.002 inch):     |
|
188-5046 Shim Pack | Total thickness is 2.4 mm (0.09 inch). Thickness of six shims is 0.05 mm (0.002 inch). Thickness of seven shims is 0.3 mm (0.01 inch). |
||
10     | 4     | 202-6473 Bolt     | Torque to 300 ± 40 N·m (221 ± 30 lb ft).     |
11     | 8     | 6A-5591 Bolt     | Torque to 105 ± 20 N·m (77 ± 15 lb ft).     |
12     | 2     | 2H-3088 O-Ring Seal     | Lubricate bore lightly with lubricant that is being sealed.     |
13     | 1     | As required, use the following shim pack in order to obtain end play of 0.08 ± 0.03 mm (0.003 ± 0.001 inch):     |
|
6I-8497 Shim Pack | Total thickness is 2.1 mm (0.08 inch). Thickness of six shims is 0.05 mm (0.002 inch). Thickness of six shims is 0.30 mm (0.012 inch). |
||
14     | 1     | 3J-0634 O-Ring Seal     | Lubricate bore lightly with lubricant that is being sealed.     |
15     | 1     | 138-1509 Ecology Drain Gp     | Apply white Loctite Breakloose PST to threads. Torque to 100 ± 10 N·m (74 ± 7 lb ft).     |
16     | 1     | 3H-2652 O-Ring Seal     | Lubricate bore lightly with lubricant that is being sealed.     |
17     | 1     | 2H-3927 O-Ring Seal     | Lubricate bore lightly with lubricant that is being sealed.     |
Caterpillar Information System:
966H Wheel Loader and 972H Wheel Loader Braking and Hydraulic Fan System Brake and Hydraulic Fan System Troubleshooting
C32 Marine Engines Valve Mechanism Cover Base - Remove and Install
990H Wheel Loader and 844H Wheel Dozer Steering System Steering High Pressure System
2005/07/25 Tube Assemblies for the Hydraulic Tank Have Been Replaced {5056, 5057}
AD45B Underground Articulated Truck Hydraulic System Control Valve (Hoist/Ejector) - Ejector Body Machine
2005/07/25 New Axle Shafts Are Now Used On Certain Wheel Tractor-Scrapers {4051}
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems Loader Frame from Rear Frame - Separate
D6R Series III and D6T Track-Type Tractors Engine Supplement Water Temperature Regulator - Remove and Install
990H Wheel Loader and 844H Wheel Dozer Steering System Steering Pilot System
C32 Marine Engines Crankshaft Front Seal - Install
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Pilot Pressure to the Main Control Valve - Check
C6.6 Engines for Caterpillar Built Machines Engine Oil Pressure
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C32 Marine Engines Rocker Arm and Shaft - Remove
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Clutch (First, Third)
Installation Instructions for the Handrail and Step Gp (Kit) (Cab, Front Access) {7254, 7256} Installation Instructions for the Handrail and Step Gp (Kit) (Cab, Front Access) {7254, 7256}
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Clutch (Forward High, Forward Low)
C32 Marine Engines Rocker Arm and Shaft - Install
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Clutch (Reverse, Second)
D6R Series III and D6T Track-Type Tractors Engine Supplement Water Pump - Remove
AD45B Underground Articulated Truck Hydraulic System Relief Valve (Hoist Dual Stage) - Test and Adjust
D6R Series III and D6T Track-Type Tractors Engine Supplement Water Pump - Install
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Front Axle Mounting
Bench Test Procedure For A 980C Wheel Loader Transmission {3030, 3073, 3101} Bench Test Procedure For A 980C Wheel Loader Transmission {3030, 3073, 3101}