2005/07/25 Caterpillar


Tube Assemblies for the Hydraulic Tank Have Been Replaced {5056, 5057}

Usage:

953C BBX
Track-Type Loader:
953C (S/N: BBX1-UP)

Description of Change: The tube assemblies that connect the hydraulic tank to the manifold have been replaced on Track-Type Loaders that have the following attachments:

Adaptable To: The 226-7755 Tube As has been replaced with the 191-9533 Tube As. The 226-7756 Tube As has been replaced with the 191-9534 Tube As and the 148-8352 Elbow Gp, as shown. See Illustration 1.




Illustration 1g01188237

Partial view of the 226-7379 Hydraulic Oil Lines Gp

(1) 191-9533 Tube As

(2) 191-9534 Tube As

(3) 148-8352 Elbow Gp

This change was effective with 953C (S/N: BBX2247). The change is adaptable to the 953C machines that are identified in Table 1.

The 226-7755 Tube As and the 226-7756 Tube As are part of the 226-7379 Hydraulic Oil Lines Gp .

Note: The 226-7379 Hydraulic Oil Lines Gp is nonserviceable at this level.

Table 1
Adaptability    
(S/N: BBX109-113,117,120,123,126,134,144-147,162-163,167,169,171,173,180-181,185-187,197,200,204,215-216,219,226,233,235-237,239,248-249,251,257,260-262,268-269,285,294,301-302,304-305,316,320-324,326-327,330-332,339-340,346-347,357,367,377-378,389,392,399-400,402-403,410-411,415-417,419-420,426-427,430,432,437,442,446,448,454,456,461,470,474-476,478,480,483,491-492,497,499,501,505,507,509,513,519,521,526-527,530,532,534-535,537-539,544-545,550,552-555,557-559,561-562,564,574-575,579,583,586,588-589,607-612,617-620,622-623,625,628,632,635,637,639,641,644-647,649,651,654-657,660-661,664-665,667,670,673-674,680,684,688-689,692-694,696,702,708,710,712,714-715,717-721,727-728,738,741,744,747,749,753,755-756,762,771,777,780,789,795,797,798,809,813,816-817,820,822-824,826,829,853,865,869,874,876,879,885-887,892,894,896-897,901,920-921,924,929,937,944-945,948-950,953,956,959-960,966,977-979,981,983,990,992,1005,1007,1021,1027,1030-1031,1033,1036,1042-1046,1052,1055,1058,1061,1066-1068,1073-1074,1079,1081,1085,1090-1094,1097,1101,1105-1106,1110,1115,1117,1119-1120,1123-1125,1134,1141,1144-1145,1153,1169,1171-1172,1186-1188,1191,1193,1197,1199,1206,1215,1228-1229,1236,1248-1249,1260,1264,1268,1271-1273,1277,1281-1282,1286,1288,1290,1292,1299-1300,1302-1305,1310-1311,1314-1317,1320-1321,1329,1333-1334,1338-1339,1341-1342,1344-1345,1348,1350-1351,1355,1371-1372,1375,1379,1383,1385,1388-1389,1395-1397,1407,1410,1413,1419,1429-1430,1432,1434,1436-1437,1441-1443,1447-1448,1450-1451,1455-1456,1458-1459,1463,1465,1469-1471,1473-1474,1477,1479,1481-1482,1485-1487,1489,1493,1497,1500,1508,1511-1512,1540-1544,1546,1549,1551,1555,1569-1570,1572-1574,1576-1578,2002-2004,2010,2013-2014,2019-2020,2032,2036-2038,2040,2042,2051,2056,2059-2063,2065,2067,2069,2079,2081,2084,2090,2096,2101-2106,2111-2113,2120,2123,2131,2133-2134,2137,2140,2142-2144,2147,2149,2167-2168,2173-2174,2180,2184,2190,2199,2204-2205,2216,2218,2220,2223,2225-2226,2228,2230-2231,2233,2236,2238-2239,2242-2244,2252-2253,2255-2257,2259-2264,2266-2273)    

Caterpillar Information System:

AD45B Underground Articulated Truck Hydraulic System Control Valve (Hoist/Ejector) - Ejector Body Machine
2005/07/25 New Axle Shafts Are Now Used On Certain Wheel Tractor-Scrapers {4051}
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems Loader Frame from Rear Frame - Separate
D6R Series III and D6T Track-Type Tractors Engine Supplement Water Temperature Regulator - Remove and Install
990H Wheel Loader and 844H Wheel Dozer Steering System Steering Pilot System
C32 Marine Engines Crankshaft Front Seal - Install
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Pilot Pressure to the Main Control Valve - Check
C6.6 Engines for Caterpillar Built Machines Engine Oil Pressure
AD45B Underground Articulated Truck Power Train Electronic Control System Retarder Function
AD45B Underground Articulated Truck Power Train Electronic Control System System Schematic
AD45B Underground Articulated Truck Power Train Electronic Control System Position Sensor (Transmission Gear) - Check
AD45B Underground Articulated Truck Power Train Electronic Control System Configuration
990H Wheel Loader and 844H Wheel Dozer Steering System Steering High Pressure System
C32 Marine Engines Valve Mechanism Cover Base - Remove and Install
966H Wheel Loader and 972H Wheel Loader Braking and Hydraulic Fan System Brake and Hydraulic Fan System Troubleshooting
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Power Train Output Transfer Gears
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
C32 Marine Engines Rocker Arm and Shaft - Remove
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Clutch (First, Third)
Installation Instructions for the Handrail and Step Gp (Kit) (Cab, Front Access) {7254, 7256} Installation Instructions for the Handrail and Step Gp (Kit) (Cab, Front Access) {7254, 7256}
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Clutch (Forward High, Forward Low)
C32 Marine Engines Rocker Arm and Shaft - Install
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Clutch (Reverse, Second)
D6R Series III and D6T Track-Type Tractors Engine Supplement Water Pump - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.