Fuel Transfer Pump
Show/hide table
Illustration 1 | g01173764 |
(1) Inlet port
(2) Weep hole (3) Outlet port (4) Pressure regulating valve |
When the fuel transfer pump is using diesel fuel, the fuel transfer pump has the following specifications:
- Run the pump at 2940 rpm. The full bypass pressure must be
2100 to 2170 kPa (305 to 315 psi) . - Run the pump at 840 rpm. The flow at
550 kPa (80 psi) must be minimum3.0 L/min (0.8 US gpm) . - Run the pump at 2940 rpm. The flow at
1930 kPa (280 psi) must be minimum7.0 L/min (1.85 US gpm) . - Run the pump at 120 rpm. Keep the inlet open to the atmosphere for 10 seconds. Block the inlet. The pump must maintain the vacuum of
30 kPa (4.5 psi) minimum in 30 seconds. - Run the pump at 840 rpm. Keep the inlet open to the atmosphere for 10 seconds. Block the inlet. The pump must maintain the vacuum of
45 kPa (6.5 psi) minimum in 30 seconds. - Run the pump at 120 rpm with a blocked inlet for 30 seconds. The pump inlet must have a suction lift of
60.9 kPa (9 psi) minimum.
When the pump is viewed from the drive end the rotation of the pump is counterclockwise.
Caterpillar Information System:
3500 Engines Turbocharger
C175 Generator Sets Product Storage
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0006 FMI 11 Cylinder #6 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0005 FMI 11 Cylinder #5 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0004 FMI 11 Cylinder #4 Injector fault
TH31 Well Servicing Transmissions Speed Sensor (Transmission) - Remove and Install
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0003 FMI 11 Cylinder #3 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0002 FMI 11 Cylinder #2 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0001 FMI 11 Cylinder #1 Injector fault
C27 and C32 Generator Set Engines Event Codes
C27 and C32 Generator Set Engines Low Power/Poor or No Response to Throttle
C27 and C32 Generator Set Engines Intermittent Low Power or Power Cutout
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Transmission Mounting - TH31 Transmission Support
C32 Petroleum Engines Air Shutoff - Remove
C32 Petroleum Engines Air Shutoff - Install
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner
C32 Petroleum Engines Air Shutoff - Disassemble
C175 Generator Sets Product Description
C15 On-Highway Engine Belt Tensioner
320D and 323D Excavators Machine System Specifications Travel Motor Lines
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Pump Drive - PTO
C13 and C15 On-Highway Engines Engine Operation with Intermittent Diagnostic Codes
345C MHPU Mobile Hydraulic Power Unit Machine Systems Hydraulic Tank and Filter - Install
C15 On-Highway Engine Engine Support (Front)