Turbocharger - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7573     | 连杆支架     | 1     |
开始:
- 拆卸空气滤清器。 请参阅拆解和组装, "空气滤清器 - 拆卸和安装"。
- 断开接头 (2) 。 将接头 (2) 和软管组件 (1) 移开。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
图 1 | g01428241 |
- 将工具 (A) 和适当的起吊设备固定到涡轮增压器 (3) 上。 涡轮增压器 (3) 的重量约为 59 kg (130 lb)。
- 断开卡箍 (4) 、 (6) 和 (7) 。
Show/hide table
图 2 | g01428242 |
- 卸下螺栓 (5) 。 拆下涡轮增压器 (3) 。
- 从涡轮增压器支架 (10) 上拆下滤网组件 (8) 并检查。 拆下 O 型密封圈 (9) 。
Show/hide table
图 3 | g01949854 |
- 对其余的涡轮增压器重复第 1 到 4 步。
Caterpillar Information System:
C27 and C32 Engines General Information
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track - Separate - Non-PPR2
C9 Marine Engines System Overview
C4.4 and C6.6 Engines Event Codes
2005/09/26 New Turbocharger Water Lines are now Used {1380}
C9 Generator Set Engines System Configuration Parameters
2005/10/03 A New Retaining Plate and Bolts for the Bushing on the Engine Idler Gear are Now Available {1151, 1210, 1234}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Disassemble
2005/09/26 A New Fuel Lift Pump is Now Available {1256, 1258}
3500 Marine Engines Pistons, Rings and Connecting Rods
C27 and C32 Generator Set Engines Coolant Level Sensor Circuit - Test
C175 Generator Set Engines Vibration Damper - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track - Connect - Non-PPR2
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner
C7 and C9 On-highway Engines Reference Material
C175 Generator Set Engines Turbocharger - Install
2005/09/01 Responsibilities for Emission Certified Engines {1000, 1900}
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Joystick) - Disassemble
C175 Generator Set Engines Auxiliary Water Pump - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Joystick) - Assemble
C175 Generator Set Engines Auxiliary Water Pump - Install
C27 and C32 Engines Electronic Control System Components
C27 and C32 Generator Set Engines Electrical Power Supply Circuit - Test