Track - Separate - Non-PPR2
分离步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 260-9412 | 链条组件 | 1 |
| B | 5P-6214 | 履带挡块组件 | 2 |
| C | 5P-2379 | 履带压力工具总成 | 1 |
| 8S-7172 | 双作用油缸 | 1 | |
| 8S-9903 | 履带压力滚翻总成 | 1 | |
- 将机器停放在光滑水平的地面上。
- 履带主销的位置必须高于链轮或引导轮的中心线。
- 释放履带张紧力。 请参阅操作和保养手册, "履带的调整 - 调整"。
Show/hide table
 |
油脂和机油从安全阀中溢出可能导致人身伤亡。 处于高压下的油脂和机油从安全阀中溢出，可能渗透阀体。 不要通过安全阀来观察油脂是否溢出。 应通过履带或履带调节油缸查看履带是否松脱。 确保通风孔清洁，然后释放履带上的张紧力。 |
- 利用工具 (A) 支撑履带板 (2) 。 拆下螺栓 (1) 。 拆下履带板 (2) 。
注: 要为拆下主销提供附加的间隙，请拆下主销两侧的履带板 (2) 。
Show/hide table
 | |
| 图 1 | g01167154 |
- 将工具 (B) 放到履带的对面，以防止履带从支重轮架上滑落。
Show/hide table
 | |
| 图 2 | g01174955 |
- 使用工具 (C) 分离主链节。 利用适当起吊设备将履带从工具 (B) 上升起。 拆下工具 (B) 。 下方履带组件。
Show/hide table
 | |
| 图 3 | g01205428 |
Caterpillar Information System:
C9 Marine Engines System Overview
C4.4 and C6.6 Engines Event Codes
2005/09/26 New Turbocharger Water Lines are now Used {1380}
C9 Generator Set Engines System Configuration Parameters
2005/10/03 A New Retaining Plate and Bolts for the Bushing on the Engine Idler Gear are Now Available {1151, 1210, 1234}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Disassemble
2005/09/26 A New Fuel Lift Pump is Now Available {1256, 1258}
3500 Marine Engines Pistons, Rings and Connecting Rods
C27 and C32 Generator Set Engines Coolant Level Sensor Circuit - Test
C175 Generator Set Engines Vibration Damper - Remove and Install
C9 Generator Set Engines Diagnostic Code Cross Reference
Bench Test Procedure for TH48FT - E80 Oil Field Transmission{3030, 3073, 3101} Bench Test Procedure for TH48FT - E80 Oil Field Transmission{3030, 3073, 3101}
C27 and C32 Engines General Information
C175 Generator Set Engines Turbocharger - Remove
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track - Connect - Non-PPR2
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner
C7 and C9 On-highway Engines Reference Material
C175 Generator Set Engines Turbocharger - Install
2005/09/01 Responsibilities for Emission Certified Engines {1000, 1900}
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Joystick) - Disassemble
C175 Generator Set Engines Auxiliary Water Pump - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Joystick) - Assemble
C175 Generator Set Engines Auxiliary Water Pump - Install