Sensors and Electrical Connectors
Show/hide table
 | |
| 图 1 | g01201330 |
结构图 | |
C15 发动机
Show/hide table
 | |
| 图 2 | g01201302 |
典型部件位置 (1) 发动机冷却液温度传感器 (2) 增压压力传感器 (3) 喷油器气门室盖入口接头 (4) 进气歧管空气温度传感器 (5) 压差开关（燃油） (6) 燃油压力传感器 (7) 燃油温度传感器 (8) 辅助发动机转速 / 正时传感器 (9) 主发动机转速 / 正时传感器 (10) 正时标定端口 (11) 大气压力传感器 (12) 发动机机油压力传感器 (13) 正时标定探针接头 (14) 发动机控制模块（ECM） (15) J2/P2 ECM 接头 (16) J1/P1 ECM 接头 | |
Caterpillar Information System:
3600 Distillate Fuel Engines Product Storage
2005/09/12 Improved Seal on Fuel Filter {1261}
2005/09/01 Improved Seal on Fuel Filter {1261}
C15 Petroleum Generator Set Engines Vibration Damper - Check
C175 Generator Set Engines Water Pump - Install
C1.5 and C2.2 Generator Set Engines Rocker Shaft and Pushrod - Remove
2007/07/30 Improved Seal on Fuel Filter {1261}
C175-16 and C175-20 Locomotive Engines Water Pump - Remove
C15 Petroleum Generator Set Engines Fuel System - Prime
C15 Petroleum Generator Set Engines Cooling System
C15 Petroleum Generator Set Engines Air Inlet and Exhaust System
C15 Petroleum Generator Set Engines Fuel System
C1.5 and C2.2 Generator Set Engines Rocker Shaft - Disassemble
C1.5 and C2.2 Generator Set Engines Rocker Shaft - Assemble
C1.5 and C2.2 Generator Set Engines Rocker Shaft and Pushrod - Install
C175 Generator Set Engines Engine Oil Screen - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Sprocket - Remove and Install
C1.5 and C2.2 Generator Set Engines Cylinder Head - Remove
C15 and C18 Industrial Engines Engine Oil Pan
C32 Petroleum Engines Engine Oil Cooler - Install
2005/09/12 Make Sure to Clean the Shaft for the Engine Oil Scavenge Pump's Gear {1312}
C15 Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
2005/09/12 Remanufactured Rocker Arm has been Changed {1123}
C1.5 and C2.2 Generator Set Engines Cylinder Head - Install