Engine Oil Filter Housing - Install
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7573 | 连杆支架 | 3 |
- 将工具 (A) 和适当的起吊设备安装在发动机机油滤清器壳体 (6) 上。 发动机机油滤清器壳体 (6) 的重量约为 104 kg (230 lb)。 将发动机机油滤清器壳体 (6) 安置到发动机上。 安装螺栓 (7) 。 安置管组件 (9) 。 安装螺栓 (8) 。
Show/hide table
 | |
| 图 1 | g01523725 |
- 将螺栓 (2) 安装到发动机机油滤清器壳体 (6) 内。 将呼吸器 (1) 和螺栓 (5) 分别安置到每侧。 安置管组件 (3) 并安装螺栓 (4) 。
Show/hide table
 | |
| 图 2 | g01523722 |
- 检查发动机机油油位。 请参阅操作和保养手册, "发动机机油油位 - 检查"。
End By: 安装温度控制阀。 请参阅 拆解和组装, "水温控制阀 - 安装"。
Caterpillar Information System:
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Before Starting Engine
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Recoil Spring - Assemble
C6.6 Engines for Caterpillar Built Machines Glow Plugs - Test
C7.1 Engines for Caterpillar Built Machines Cooling System
511, 521, 522 and 532 Track Feller Bunchers Machine Systems Track Shoe Bolts
3406C Engines for Caterpillar Built Machines Engine Oil Pump
C32 Petroleum Engines Engine Oil Cooler - Remove
C4.4 Industrial Engine Glow Plugs - Test
2005/10/01 Improved Coolant Hoses on the Air Compressor {1803}
C32 Petroleum Engines Engine Oil Filter Base - Assemble
C32 Petroleum Engines Engine Oil Filter Base - Disassemble
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Recoil Spring - Disassemble
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Engine Starting
2005/10/10 Improved Rectifier Assembly Is Now Used {4465}
C4.4 Industrial Engine Crankshaft Position Sensor
C15 Petroleum Generator Set Engines General Information
C15 Petroleum Generator Set Engines Electronic Control System Components
C15 Petroleum Generator Set Engines Fuel System
C15 Petroleum Generator Set Engines Air Inlet and Exhaust System
C15 Petroleum Generator Set Engines Cooling System
C15 Petroleum Generator Set Engines Fuel System - Prime
C175-16 and C175-20 Locomotive Engines Water Pump - Remove
2007/07/30 Improved Seal on Fuel Filter {1261}
C1.5 and C2.2 Generator Set Engines Rocker Shaft and Pushrod - Remove