Engine Oil Filter Base - Assemble
- Lubricate valve (2). Install valve (2) in engine oil filter base (1).
- Lubricate plungers (4) and springs (5) with clean engine oil. Install plungers (4) and springs (5) in body (3) of the oil filter bypass.
- Position gasket (6) and cover (7) on body (3) of the oil filter bypass. Install bolts (9) and washers (8).
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| |
| Illustration 1 | g01200884 |
Show/hide table
 |
|
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
End By:
- Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".
Caterpillar Information System:
C32 Petroleum Engines Engine Oil Filter Base - Disassemble
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Recoil Spring - Disassemble
C7.1 Engines for Caterpillar Built Machines Piston Ring Groove - Inspect
C6.6 Engines for Caterpillar Built Machines Power Sources
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Front Idler, Recoil Spring and Hydraulic Track Adjuster - Install
C175 Generator Set Engines Engine Oil Filter Housing - Remove
C6.6 Engines for Caterpillar Built Machines Fuel Injection Timing - Check
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Mode Switch Setup
C11 and C13 Engines for Caterpillar Built Machines Low Engine Oil Pressure Lamp Circuit - Test
C15 Generator Set Engines Speed Control (Switch) - Test
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil and Water Pump Drive - Install
2005/10/01 Improved Coolant Hoses on the Air Compressor {1803}
C4.4 Industrial Engine Glow Plugs - Test
C32 Petroleum Engines Engine Oil Cooler - Remove
3406C Engines for Caterpillar Built Machines Engine Oil Pump
511, 521, 522 and 532 Track Feller Bunchers Machine Systems Track Shoe Bolts
C7.1 Engines for Caterpillar Built Machines Cooling System
C6.6 Engines for Caterpillar Built Machines Glow Plugs - Test
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Recoil Spring - Assemble
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Before Starting Engine
C175 Generator Set Engines Engine Oil Filter Housing - Install
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Engine Starting
2005/10/10 Improved Rectifier Assembly Is Now Used {4465}