Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Operate the machine for a few minutes before you obtain the fluid sample. This will thoroughly mix the fluid for a more accurate sample.
Illustration 1 | g01167247 |
Front Axle (Right Side) |
Illustration 2 | g01167248 |
Rear Axle (Left Side) |
The axles are not equipped with sampling valves. Obtaining a sample of the differential and final drive oil will require a vacuum pump or an equivalent. Remove the dipstick/fill plug on the right side of each axle and withdraw the oil through the filler opening.
Reference: For more information, refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" and Special Publication, PEHP6001, "How To Take A Good Oil Sample".