Draft Frame Arm Assembly - Install
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 8S-8048 | Saddles | 2 |
| 8S-7630 | Stands | 2 | |
| 8S-7625 | Collars | 2 | |
| 8S-7641 | Tubes | 2 | |
| 8S-7650 | Cylinder Assemblies | 2 | |
| 4C-5809 | Electric Hydraulic Pump Gp | 1 | |
| B | 9U-7536 | Lift Stand | 2 |
| 4C-5809 | Electric Hydraulic Pump Gp | 1 | |
| C | 8S-7640 | Stand | 1 |
| 8S-7631 | Tube | 1 | |
| FT1603 | Tube Cap | 1 | |
| D | 1U-9200 | Lever Puller Hoist | 1 |
| 138-7574 | Link Bracket | 1 | |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Install a suitable lifting device and Tooling (D) to arm assembly (6). The weight of arm assembly (6) is approximately 770 kg (1700 lb). Position arm assembly (6) to the scraper.
Show/hide table
 | |
| Illustration 1 | g01083103 |
- Position cap (9) and guard (7) to arm assembly (6). Install bolts (8). Remove Tooling (D) and support arm assembly (6) with Tooling (C) .
Show/hide table
 | |
| Illustration 2 | g01083104 |
Show/hide table
 | |
| Illustration 3 | g01083100 |
- Raise arm assembly (6) and install bolts (5) .
Show/hide table
 | |
| Illustration 4 | g01083098 |
- Connect hose assemblies (4) .
Show/hide table
 | |
| Illustration 5 | g01083085 |
- Install clamps (3) .
Show/hide table
 | |
| Illustration 6 | g01083086 |
- Install guards (2) .
Show/hide table
 | |
| Illustration 7 | g01083080 |
- Remove Tooling (A) from draft frame (1) .
Show/hide table
 | |
| Illustration 8 | g01083087 |
- Remove Tooling (B) from the tractor.
Show/hide table
 | |
| Illustration 9 | g01083090 |
Caterpillar Information System:
2004/07/05 Improved Inlet Hose is Now Used {3016}
D9T Track-Type Tractor Engine Supplement Radiator Guard - Install
C11 and C13 Petroleum Engines General Information
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Relief Valve (Transmission Hydraulic Control) - Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train Relief Valve (Transmission Hydraulic Control) - Remove
631G and 637G Wheel Tractor-Scrapers Machine Systems Draft Frame Arm Assembly - Remove
AD55 Underground Articulated Truck Power Train Relief Valve (Torque Converter Inlet) Pressure - Test and Adjust
AD55 Underground Articulated Truck Power Train Torque Converter Lockup Clutch Primary Pressure - Test and Adjust
AD55 Underground Articulated Truck Power Train Torque Converter Lockup Clutch Maximum Pressure - Test
AD55 Underground Articulated Truck Power Train Torque Converter Lockup Clutch Leakage - Test
2004/06/21 Improved Wiper Seals Are Now Available {5102, 5104, 5352, 5356}
930G Wheel Loader Hydraulic System Main Control Valve (3-Function)
525C, 535C and 545C Wheel Skidders Cooling System Coolant Sample (Level 1) - Obtain
525C, 535C and 545C Wheel Skidders Cooling System Coolant Sample (Level 2) - Obtain
525C, 535C and 545C Wheel Skidders Differential and Final Drive Oil Sample - Obtain
525C, 535C and 545C Wheel Skidders Engine Oil Sample - Obtain
525C, 535C and 545C Wheel Skidders Hydraulic System Oil Sample - Obtain
525C, 535C and 545C Wheel Skidders Transmission Oil Sample - Obtain
525C, 535C and 545C Wheel Skidders Winch Oil Sample - Obtain
930G Wheel Loader Hydraulic System Main Control Valve (4-Function)
AccuGrade Laser System Bank Valve (Grade Control) - Calibrate
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System Main Control Valve (Auxiliary) (5th, 6th Functions)
631G and 637G Wheel Tractor-Scrapers Machine Systems Load Cylinder - Remove and Install
930G Wheel Loader Braking and Hydraulic Fan System Gear Pump (Brake, Hydraulic Fan)