D5N Track-Type Tractor Hydraulic System Caterpillar


Bulldozer Angle Control Valve

Usage:

D5N AGG



Illustration 1g01072515

(1) 5S-0003 Nut ... 11 ± 2 N·m (97 ± 18 lb in)

(2) 6E-0772 Relief Valve

Installation torque for valve ... 68 ± 2 N·m (50.0 ± 1.5 lb ft)

(3) Installation torque for two bolts ... 8.1 ± 1.5 N·m (72.0 ± 13.3 lb in)

(4) Installation torque for nut ... 13 ± 1.5 N·m (115.0 ± 13.3 lb in)

(5) 189-8898 Solenoid Valve Gp ... 40 ± 5 N·m (29.5 ± 3.7 lb ft)

(6) Plug ... 68 ± 2 N·m (50.0 ± 1.5 lb ft)

(7) Plugs ... 14 ± 2 N·m (124.0 ± 18.0 lb in)

Caterpillar Information System:

2004/05/10 The Addition of Plates Improve the Service Life of the Mounts for the Ejector Cylinder {6201}
C11 and C13 Petroleum Engines Electric Starting Motor
D9R and D10R Variable Speed Fan Clutch Fan Speed Sensor
988H Wheel Loader Power Train Transmission Hydraulic Control
AD30 Underground Articulated Truck Drive Shaft (Rear) - Remove and Install
AD55 Underground Articulated Truck C18 Engine Supplement Radiator - Remove
AD55 Underground Articulated Truck C18 Engine Supplement Radiator Tank (Header) - Install
992G Wheel Loader and 854G Wheel Dozer Power Train MID 081 - CID 1022 - FMI 04
988H Wheel Loader Steering System STIC Control
Product Link - PL102C Electrical Connector - Inspect
Product Link - PL102C Wiring Harness (Open Circuit) - Test
Product Link - PL102C Wiring Harness (Short Circuit) - Test
988H Wheel Loader Steering System Steering System Troubleshooting
C11 and C13 Engines Electronic Unit Injector Wiring
D6N Track-Type Tractor Hydraulic System Bulldozer Lift Control Valve
992G Wheel Loader Electrohydraulic System Position Sensor (Tilt Linkage) - Replace
Comfort Series Seat For Caterpillar Machines Comfort Seat Controls
834H Wheel Dozer and 836H Landfill Compactor Power Train Relief Valve (Transmission Hydraulic Control)
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Target Bucket Weight Entering
C11 and C13 Engines Fuel Filter Base
988H Wheel Loader Steering System Pump Performance (Steering) - Test
D5N Track-Type Tractor Hydraulic System Location of Hydraulic Components
AD45B Underground Articulated Truck Machine Systems Gear Pump (Secondary Steering) - Disassemble
AD45B Underground Articulated Truck Machine Systems Gear Pump (Secondary Steering) - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.