2003/07/21 Caterpillar


A New Fuel Priming Pump Is Used on the Wheel Feller Bunchers and the Wheel Skidders {1258}

Usage:

545 2FZ
Wheel Feller Bunchers:
533 (S/N: CDR1-UP)
543 (S/N: ASJ1-UP)
TK370 (S/N: WBD135-UP)
TK380 (S/N: WBE167-UP)
Wheel Skidders:
525B (S/N: 3KZ1140-UP)
535B (S/N: AAE640-UP)
545 (S/N: 2FZ450-UP)

Description of Change: A new fuel priming pump replaces the existing fuel priming pump. The new fuel priming pump has increased service life.

Adaptable To:




Illustration 1g01013542

(1) 137-5541 Fuel Priming Pump

(2) 1P-0436 Gasket

(3) Fuel Filter

The new 137-5541 Fuel Priming Pump replaces the 105-2508 Fuel Priming Pump As .

The new 137-5541 Fuel Priming Pump is effective with the 525B S/N:3KZ1140-UP
Wheel Skidder, the 535B S/N:AAE640-UP
Wheel Skidder, the 545 S/N:2FZ450-UP
Wheel Skidder, the TK370 S/N:WBD135-UP
Wheel Feller Buncher, and the TK380 S/N:WBE167-UP
Wheel Feller Buncher.

The new 137-5541 Fuel Priming Pump is adaptable to the first production of the 525B S/N:3KZ1-UP
, the 535B S/N:AAE1-UP
, the 545 S/N:2FZ1-UP
, the 533 S/N:CDR1-UP
, the 543 S/N:ASJ1-UP
, the TK370 S/N:WBD1-UP
, and the TK380 S/N:WBE1-UP
.

Caterpillar Information System:

D3G, D4G and D5G Track-Type Tractors Electrohydraulic Position Sensor (Deceleration Pedal) - Calibrate
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Reverse Solenoids of Drive Pumps - Calibrate
Bench Test Procedure for a 988G and 988H Wheel Loader Transmission {3030, 3073, 3139} Bench Test Procedure for a 988G and 988H Wheel Loader Transmission {3030, 3073, 3139}
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Forward Solenoids of Drive Pumps and Solenoids of Drive Motors - Calibrate
2003/08/01 A Previous High Temperature Locknut is Used in Engine Exhaust System Groups {7553}
D3G, D4G and D5G Track-Type Tractors Capacities (Refill)
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Position Sensor (Service Brake Pedal) - Calibrate
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Position Sensor (Forward/Neutral/Reverse) of Joystick Control - Calibrate
AD55 Underground Articulated Truck Transmission Magnetic Screen - Clean
AD55 Underground Articulated Truck Transmission Breather - Replace
994D Wheel Loader Bucket Cutting Edges - Inspect/Replace
994D Wheel Loader Battery or Battery Cable - Inspect/Replace
AD55 Underground Articulated Truck Transmission Oil - Change
AD55 Underground Articulated Truck Transmission Oil Filter - Replace
AD55 Underground Articulated Truck Transmission Oil Level - Check
AD55 Underground Articulated Truck Turbocharger - Inspect
AD55 Underground Articulated Truck Body Mounting - Inspect
AD55 Underground Articulated Truck Belts - Inspect/Adjust/Replace
AD30 Underground Articulated Truck Braking System Brake Oil Overheating Troubleshooting
3126B Machine Engines Decelerator Position Sensor Circuit - Test
963C Track-Type Loader Machine Systems Refrigerant Evaporator Coil - Remove
963C Track-Type Loader Machine Systems Refrigerant Evaporator Coil - Install
D3G, D4G and D5G HYSTAT Track-Type Tractors Electrohydraulic Power Train Systems Piston Pump (Hydrostatic)
C11 and C13 Engines for Caterpillar Built Machines Crankshaft - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.