Turbocharger Outlet Pressure Sensor - Remove and Install
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect the harness assembly from turbocharger outlet pressure sensor (1) .
Show/hide table
Illustration 1 | g01184083 |
- Remove turbocharger outlet pressure sensor (1) from the adapter on the cylinder block.
- Inspect the condition of the O-ring seal on turbocharger outlet pressure sensor (1). Replace the O-ring seal, if necessary.
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install turbocharger outlet pressure sensor (1). Tighten turbocharger outlet pressure sensor (1) to a torque of 10 ± 2 N·m (89 ± 18 lb in).
Show/hide table
Illustration 2 | g01184083 |
- Connect the harness assembly to turbocharger outlet pressure sensor (1) .
Caterpillar Information System:
C15 On-Highway Engine Inlet Manifold Pressure - Test
C32 Petroleum Generator Sets Speed Sensor - Clean/Inspect
3126B Petroleum Engine Speed/Timing Sensor - Remove and Install
3126B Petroleum Engine Engine Oil Temperature Sensor - Remove and Install
3126B Petroleum Engine Injection Actuation Pressure Sensor - Remove and Install
C15 On-Highway Engine Fuel System
3126B Petroleum Engine Fuel Pressure Sensor - Remove and Install
C2.2 Generator Sets Generator Lead Connections
3126B Petroleum Engine Engine Oil Pressure Sensor - Remove and Install
3126B Petroleum Engine Coolant Temperature Sensor - Remove and Install
568 Forest Machines Machine Systems Swing Cushion Valve - Assemble
568 Forest Machines Machine Systems Swing Cushion Valve - Disassemble
3126B Petroleum Engine Inlet Air Temperature Sensor - Remove and Install
C15 On-Highway Engine Engine Oil Pressure - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Indicator Lamp Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Analog Throttle Position Sensor Circuit - Test
C32 Marine and Auxiliary Marine Engines Auxiliary Water Pump - Remove
Work Area Vision System Safety
Work Area Vision System Modes Of Operation
C6.6 Industrial Engine Engine Oil Pan
Work Area Vision System Display - Clean
Work Area Vision System Camera - Clean
Work Area Vision System General Information
C15 On-Highway Engine Basic Engine